-
E-mail
sales@meokon.cn
- Phone
-
Address
No. 58 Yaojiabang Road, Baihe Industrial Zone, Qingpu District, Shanghai
Product Categories
Shanghai Mingkong Sensing Technology Co., Ltd
MD-EL-F split electromagnetic flowmeter
NegotiableUpdate on 05/03
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Corrosion resistant and wear-resistant large LCD display electromagnetic flowmeter
Product Details
MD-EL split type electromagnetic flowmeter is suitable for measuring the flow rate of almost all electrically conductive liquids, as well as mud, paste, and slurry. The premise is that the measured medium must have at least some valley conductivity. Temperature, pressure, viscosity, and density have no effect on the measurement results.
As long as appropriate pipeline lining materials and electrical materials are selected, they can also be used to measure corrosive media. Solid particles in the medium will not affect the measurement results.
The flow sensor and intelligent converter are integrated or separated to form a complete flow meter.
Product application:
◇Clear water and sewage
◇ Electricity production and distribution
◇Chemical and industrial pharmaceuticals
◇ Food industry
☆ No moving parts, no wear and tear
☆The measurement range of the process is 1:100
☆No clarification section or flow enhancement device
☆Applied to measure the flow velocity of various conductive liquids
☆The measurement results are not affected by physical properties such as temperature, pressure, viscosity, and density
☆Strong corrosion resistance and wear resistance
☆Measurable forward/reverse flow rate
☆Large LCD screen, user-friendly interface, easy to use
☆Persistent EEPROM, used to store configuration parameters and measurement data in case of power failure
☆Wide working voltage range
☆self-diagnosis
Display: LCD display, real-time clock displays various flow data, optional m3 or L display units
Structure: Embedded type design, split type
Measurement medium: liquid or solid-liquid two-phase fluid, conductivity>0.5 μ s/cm2
Measurement range: 0.05m/s to 8m/s
Measurement accuracy: see selection guide for details
Caliber: 6mm~2000mm
Nominal pressure: PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN420, etc. Optional
Output signal: 4-20mA or frequency (<5 KHz), RS485, wireless transmission (optional), relay (optional)
Connection: DN6~DN2000 are flange connections
Connection standard: Suitable for various pipeline flange standards
Product standard: Accuracy requirements comply with JJG 1033-2007 standard
Protection level: IP65
Power supply: AC86～220V
Environmental temperature: 5~55℃
Environmental humidity:< 85% R.H (non condensing)
