MCP mining cable model 3x70+1x25+4x6 structural diagram

MCP mining cable model 3x70+1x25+4x6 structural diagram

Mining rubber sheathed flexible cable

1、 Flexible cables for coal mining machines with rated voltage of 0.66/1.14KV and below (GB12972.2-91)

This product is suitable for copper core rubber insulated sheathed flexible cables used in coal mining machines and similar equipment with rated voltage Uo/1.14V and below

（MC）UC-0.38/0.66

Rubber sheathed flexible cable for coal mining machine

Power connection of coal mining machines and similar equipment with rated voltage of 0.38/0.66KV for coal mines

(MCP)UCP-0.38/0.66

Shielded rubber sheathed flexible cable for coal mining machine

Power connection of coal mining machines and similar equipment with rated voltage of 0.38/0.66KV for coal mines

(MCP)UCP-0.66/1.14

Shielded rubber sheathed flexible cable for coal mining machine

Power connection for coal mining machines and similar equipment with a rated voltage of 0.66/1.14KV

The usage characteristics of coal mining machine cables and cables

1. The rated voltages Uo/U are 0.36/0.66KV and 0.66/1.14KV, respectively

2. The long-term allowable working temperature for cable conductors is 65 ℃.

3. The minimum bending radius of a cable is 6 times the diameter of the wire.

4. The yellow protective sheath shall not be exposed to sunlight for a long time.

Coal mining machine cable/MCP mining cable is a power cable commonly used in mines as it provides power to the coal mining machine.

MCP mining cable model 3x70+1x25+4x6 structural diagram

The product certificate should indicate the registered trademark, product name, implementation standard, product model, voltage, product specifications, cross-sectional area, product length, manufacturer, inspector, production date, manufacturer name, and be stamped with the inspector's seal. On the "certificate of conformity" of counterfeit and inferior products, the model and specifications can be arbitrarily filled in, but upon careful inspection, it is often found that there are no inspector codes, no production dates, and no production factory addresses. The inspection report for counterfeit and inferior products is often a photocopy, and the product inspection batches are also different. The specifications and models of the report and the actual product often do not match.