M618 surface grinder

NegotiableUpdate on 11/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

M618 surface grinder

Product Details

1. The workbench ball track is made of steel material, high-precision steel balls, wear-resistant, easy to move, labor-saving, and can greatly improve work efficiency.
2. The front and rear slides, with precision shoveling, not only slide smoothly and are wear-resistant, durable, with good accuracy, but also operate flexibly and lightly. The manual workbench is driven by a synchronous belt drive.
3. Vibration free, low-noise spindle motor
4. The high-precision sleeve type spindle is equipped with four precision oblique rolling bearings. After strict measurement and selection of preloading, it is assembled in a temperature control room and matched with a completely waterproof labyrinth design to ensure the service life of the bearings and the surface roughness of grinding.

Specifications			unit	M618A
	Workbench working area		mm	450x150
	Maximum left and right movement		mm	483
ability	Maximum movement before and after		mm	178
	Maximum distance from workbench to spindle center		mm	320
	The maximum load-bearing capacity of the workbench		kgs	100
	Workbench T-shaped slot		mmxN	14X 1
workbench		1 grid	mm	0.01
workbench	Front and rear handwheel feed	a circle	mm	2.5
	Grinding wheel size		mm	φ180×6～13×31.75
grinding wheel		50HZ	R．P．m	2850
grinding wheel	spindle speed	60HZ	R．P．m	3360
		1 grid	mm	0.005
top-bottom structure	Up and down handwheel feed	One rotation	mm	1.25
	spindle motor		KW	1.1
motor	Hydraulic motor		KW
motor	Flushing motor		W	40
	Machine height		mm	1 900
	floor area		mm	2110×1200
size	Net weight		kgs	750
size	gross weight		kgs	?850

M618 grinder | m618 surface grinder | m618a surface grinder

M618 grinding machine; M618 surface grinder; Small Grinding Machine M618a 1.6