- Phone
-
Address
15th Floor, Building 3, No. 266 Jiushui East Road, Licang District, Qingdao City
Product Categories
Qingdao Juchuang Era Environmental Protection Technology Co., Ltd
Laser Environment Dust Continuous Tester
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The JCF-6H laser environmental dust continuous tester is used to measure the concentration of inhalable dust (PM10, PM2.5) and the number of dust particles with a particle size of 0.3-5.0um per unit volume of air in public places with a cleanliness level of 100000 to 1 million.
Product Details
1、 JCF-6H Direct Reading Dust Detector/Laser Inhalable Dust Continuous Tester Product Introduction
JCF-6H typeLaser Environment Dust Continuous TesterUsed to measure the concentration of inhalable dust (PM10, PM2.5) and the number of dust particles with a particle size of 0.3-5.0um per unit volume of air in environments with cleanliness levels ranging from 100000 to 1000000 in public places. This instrument is designed according to the national health industry standard: "Method for determination of inhalable particulate matter (PM10) in the air of public places - Light scattering method" (WS/T206-2001). It adopts the principle of light scattering and uses semiconductor laser as the measurement light source to perform high-sensitivity non-contact measurement of dust in the air.JCF-6H typeLaser Environment Dust Continuous TesterThe entire testing process is managed and controlled by a single-chip microprocessor, using a high-resolution large screen high brightness LCD display with full Chinese language display.
2、 JCF-6H Direct Reading Dust Detector/Laser Inhalable Dust Continuous Tester Product Parameters
1PM10, PM2.5, and Total Dust (TSP)20.001-10mg/m3； In TSP mode, the maximum range is 100mg/m33. Detection sensitivity: 0.001mg/m3
5Simultaneous display of six levels (0.3, 0.5, 0.7, 1.0, 2.5, 5.0) um61-999999 pills (can be used for clean testing at 100000-100000 levels)
Air sampling flow rate:81 point, 2 points... 30 points; And manually at any time. Direct reading of dust mass concentration (mg/m3);
10TWA and allowable concentration for short-term exposure.
3、 JCF-6H Direct Reading Dust Detector/Laser Inhalable Dust Continuous Tester Product Features
2. The instrument is equipped with a programmable clock chip to provide accurate date and time information for measurement.
4. Can calculate the time weighted average（Degree value.
90-85%, 85-75%, 75-60%, below 60%
Dual use of AC and DC, with a built-in high-capacity lithium battery that can work continuously for more than 5 hours.
8. This product is suitable for measurement in situations without external power supply and can be widely used in various public places as well as in electronics and lighting
More models, equipment requirements, and discounted quotes
Please consult TEL: 13127012891
