Laboratory food grinder

1、 Product Usage:

JJ-2(B)Laboratory food grinderMainly used for scientific research, medical treatment, chemical products, food processing and other experiments on crushing biological, chemical, plant, nutrient substances, etc. It mainly consists of three parts: electric motor, stainless steel container, and machine base. This machine adopts a motor shaft that is connected to the tool shaft through a coupling joint.

2、 Application area:

1Scientific research: This machine can be used for crushing in biochemical, plant, and nutritional studies.

2Medical treatment: Both laboratory and drug can be used, especially suitable for tissue therapy drug crushing.

3Chemical and pharmaceutical industries: manufacturing gelatinous emulsions and mixtures of solid and liquid substances, such as blending oil with erythromycin agents, manufacturing concentrated beef liver mash, etc.

4Biological products: In the manufacturing process of biopharmaceuticals, the stirring and mixing of liquid drugs, as well as the crushing of microbial culture media, must be carried out under aseptic operation. All utensils must be strictly disinfected to prevent bacterial infection. The structure of this machine meets the requirements of aseptic operation.

5Food industry: available for manufacturing meat sauce, cheese, etc.

IIIJJ-2(B)Laboratory food grinderProduct Parameters

1. Output power:220W

2. Rated voltage220V

3. rated frequency50Hz

4. Load speed:12000rpm

5. heavy Quantity:7.5Kg

6. Overall dimensions:48×24×24 cm

Note: with(B)For glass cups, none(B)For stainless steel cups

Usage and precautions

1First, match the blade shaft with the machine shaft, and then move the coupling spring component downwards The machine will only run smoothly when it reaches the groove of the ruler and touches the steps firmly.

2Before starting up, it is necessary to pay attention to whether the power supply matches the voltage on the motor.

3The carbon brush should be checked regularly, and if it is too short, a new carbon brush should be replaced. If abnormal sparks are found on the carbon brush, it should be stopped immediately, the cause of the obstacle should be checked, and it can only be used after repair. To prevent the rectifier and coil from burning out.

4Due to high motor speed, continuous use may cause the motor to burn out. Therefore, the usage time is limited to three minutes and can only be used after stopping for five minutes.

5When installing the glass cup device, it needs to be aligned with the circular axis on the machine, centered, and not shaken on all sides before it can be turned on.

6This machine should not run idle, and a small amount of liquid or grease should be added during use.

7When adding materials, they should be added slowly, first in slow mode and then in fast mode. However, slow mode can only be used for starting and should not be frequently used.