Laboratory floor standing bottle washing machine

1Product Introduction
Laboratory floor standing bottle washing machineJC-XPJ-200AControl high-pressure water through microcomputer360Rinse the items, control the water temperature, rinsing time, rinsing frequency, etc., and use specialized cleaning solutions, neutralizers, etc. to clean, disinfect, and dry various laboratory glassware, circuit boards, etc. for internal and external surface stains and chemical residues.

IIProduct Features

threeProduct Features
Professional structural design

1The shell, cleaning pipeline, cleaning chamber, cleaning rack, etc. are all made of high-quality stainless steel materials（SUS304orSUS316L）Pipe fittings and valves comply with standards.

2The automatic sealing connection between the cleaning rack and the water and air inside the cleaning chamber wall ensures minimal water and air pressure loss during the entire cleaning process and guarantees the cleaning effect.

3Each layer of cleaning rack is designed with independent parallel water supply to ensure consistent cleaning effect of the double-layer cleaning rack, avoiding water pressure imbalance and cleanliness inconsistency between the two layers of cleaning racks caused by water entering the top single pipeline.

4Two water source inlet design, using solenoid valve control.

5Independent drainage pump, combined with drainage pipeline water seal design, to prevent sewage backflow.

6Anti overflow design with overflow protection function. If too much water enters the cleaning chamber, it will be automatically discharged and the program will stop executing.

7Integrated design of the whole machine, capable of independent installation; The bottom casters of the instrument are designed for easy mobility.

8High quality flame-retardant insulation board and insulation cotton reduce heat consumption during heating, shorten cleaning time, and lower power consumption.

9The upper and lower layers of the cleaning rack are universal, which improves the utilization rate of the cleaning rack and reduces the user's usage cost.

A user-friendly operating system

1Adopting a color LCD screen, the tilt angle design of the operation screen conforms to ergonomic principles, making it easy to operate and providing a better user experience.

2The "black box" function, with built-in data storage, records the cleaning status of each step throughout the process. The system has self diagnostic function and fault information prompt function.

3The parameters such as cleaning temperature, time, and cleaning solution dosage can be set by oneself.

4, configurableUSBInterface,RS232Interface to export and save data (optional)

5Configurable micro printer for printing and cleaning data (optional).

6Configurable cleaning cleanliness online monitoring function (optional).

cleaning system

1Design the nozzle at the top of the cleaning column and the fan-shaped cut on the column body,360Clean the inner surface of the vessel.

2Both the top and bottom of the cleaning room are equipped with rotating spray arms, which can be configured with three layers of rotating spray arms and optimized layout nozzles to achieve cleaning.

3The water temperature can be heated to99℃, reaching a moderate disinfection level, in compliance withENISO15883Standard.

4Configure a water circulation pump that is resistant to high temperatures and corrosion, ensuring cleaning pressure.

5Equipped with an inlet flow meter sensor, it controls the amount of water entering the cleaning machine to ensure the cleaning effect.

Complete preset cleaning program16Group the program and have the function of freely editing the program to meet unlimited expansion needs, thereby ensuring cleaning cleanliness

1Quick cleaning program: suitable for cleaning substances that are easily soluble in water.

2Standard cleaning procedure: suitable for cleaning water-soluble substances with general pollution levels.

3Strengthen cleaning procedures: suitable for cleaning substances that are difficult to dissolve in water. Custom cleaning program: suitable for cleaning substances that are difficult to dissolve in water.

4Inorganic cleaning program: suitable for cleaning containing inorganic components.

5Organic cleaning program: suitable for cleaning containing organic components.

6Plastic cleaning program: suitable for cleaning plastic containers.

7Glass cleaning program: suitable for cleaning ordinary water-soluble pollutants, such as cleaning easily soluble substances after completing experiments.

8Oil cleaning program: suitable for cleaning vessels that are generally contaminated with oil stains.

9Heavy oil cleaning program: suitable for cleaning vessels with severe oil pollution.

10Cleaning Procedure: Suitable for cleaning vessels contaminated with ingredients.

11Rinse program: suitable for cleaning slight attachments such as dust.

12Self cleaning program: self-cleaning the inner cavity and pipelines of the cleaning machine.

Secure protection system

1Equipped with electronic safety door locks and mechanical safety devices, the instrument automatically locks during operation to prevent accidental door opening and avoid hot steam injuries. If opening the door is required, the program must be paused or exited before opening.

2Over temperature protection, the instrument has functions of water heating and water pump overheating protection.

3Overflow protection, with water leakage detection devices such as drip trays installed at the bottom of the instrument.

4The instrument sink is equipped with a filter to ensure the cleanliness of the cleaning water and protect the cleaning vessels and internal components of the instrument.

5The inlet solenoid valve is equipped with a polymer material filter to prevent impurities from entering the cleaning pipeline.

6The cleaning agent shortage reminder function promptly reminds users to add cleaning agents.

7The electrical control system is equipped with overload, short circuit, overcurrent, and leakage protection functions.

Tianhua Ultrasound provides you with comprehensive technical support and after-sales service!