LY-DY-III Intelligent Conductivity Salt Density Meter

LY-DY-III Intelligent Conductivity Salt Density Meter Product Introduction

This instrument is a specialized measuring instrument developed for anti pollution flashover detection in power systems, used to measure the equivalent salt density (hereinafter referred to as' salt density ') of insulators and the conductivity of measuring solutions.
The instrument complies with the provisions and requirements of GB/T16434-1996 "Classification of Environmental Pollution and Selection of External Insulation for High Voltage Overhead Lines and Power Plants and Substations".
The instrument is centered around a microcontroller, eliminating the need for knobs and measurement section selection switches in general instruments, achieving full automation of measurement and LCD display. In addition to measuring salt density, it can also measure the conductivity, temperature, and other properties of solutions. The whole machine is characterized by high measurement accuracy, intuitive readings, easy use, and flexibility. Widely used in power, teaching, scientific research, and other related industries.

Technical specifications of LY-DY-III intelligent conductivity salt density meter

Measurement range of LY-DY-III intelligent conductivity salt density meter
Salt density: 0.01mg/cm~0.5mg/cm (based on X-4.5 type insulator)
◆ Temperature: 0 ℃~45 ℃
◆ Conductivity: 100-100000 us/cm
Measurement accuracy
Salt density: resolution of 0.001 bits, full-scale accuracy of ≤± 2%
◆ Temperature: Resolution of 0.1 bits, accuracy of ≤± 0.5 ℃
Conductivity: Resolution of 0.01 bits, full-scale accuracy of ≤± 2%
◆ Display output mode
LCD display measurement results
◆ Measurement data can be directly output through a printer
◆ Usage conditions
◆ Environmental temperature: 5 ℃~45 ℃
Relative humidity: ≤ 80%
Power supply: AC 200V~240V