LTmag TC intelligent ceramic electromagnetic flowmeter

The electromagnetic flow sensor is installed on the pipeline, and the converter is installed on the sensor. After the converter is powered on, it generates an alternating magnetic field by providing low-frequency three state constant excitation to the sensor. When the conductive liquid flows through the conduit, an induced electromotive force E proportional to the flow velocity is generated on the two electrodes. After embedded hardware circuit conversion and data processing, the instantaneous flow rate (m3/h) and cumulative flow rate (m3) are displayed. The converter has both 4-20mA DC, 2KHz frequency output, and RS485 communication interface.

1. Implement industry standards "JB/T9248-2015 Electromagnetic Flowmeters" and "JJG 1033-2007 Calibration Regulations for Electromagnetic Flowmeters"

2. Nominal diameter: DN15～DN400

3. Nominal pressure:1.6MPa～16MPa

4. Analog output: 4-20mA.DC, load ≤ 750 Ω

5. Frequency output: 0-5KHz, 12.5V;

6. Communication interface: RS485

7. Power supply: 24V DC ± 5%, 220V AC ± 15%, power loss: ≤ 15W;

8. Conductivity: The conductivity of the measured fluid is greater than 50 μ s/cm

9. LCD display: instantaneous display of 5 digits, cumulative display of 9 digits;

10. Ceramic lining characteristics: can withstand acid, alkali, high viscosity slurry and other corrosive media with medium temperature ≤ 120 ° C;

11. Electrode materials: 316 stainless steel, Hastelloy C;

12. Explosion proof grade: Isolation explosion-proof d Ⅱ BT4

13. Environmental conditions for use: Atmospheric pressure: 86~106KPa, ambient temperature: -25 ℃~+55 ℃, ambient humidity: ≤ 90%, no condensation

Mechanical vibration frequency:≤55Hz、 Amplitude ≤ 0.2mm;

14Connection method: flange type、Clamping type

Xi'an Lantian Petrochemical Equipment Co., Ltd. has a dedicated person responsible for instrument after-sales work. Every after-sales engineer has undergone rigorous technical training, and the services we provide mainly include the following aspects:

1. Technical Consultation:
Accept phone consultations at any time, answer customer questions and provide guidance, ensure customers choose instruments correctly before sales, and ensure smooth operation of instruments after sales.
2. Product Service:
The product warranty period is twelve months from the date of production. For products with quality issues (excluding human factors), our company is responsible for free repair or replacement during the warranty period; If the product warranty period expires for more than twelve months, our company will be responsible for repairing and charging production costs.
3. On site debugging and maintenance:
According to customer requirements, respond within 1 hour; And provide on-site services within 24 hours or as agreed upon by both parties according to actual needs. Provide satisfactory on-site technical services to users. Our company arranges dedicated personnel to provide on-site technical support for engineering supporting products as needed.
4. Regular follow-up visits:
The company implements service area division, with dedicated after-sales engineers conducting regular phone visits every three months to understand the operation of instruments, answer technical questions during product use, and record and archive the follow-up content.
5. User Profile:
From the date of shipment, establish user profiles and technical profiles for each instrument. Responsible by regional service engineers to ensure the normal operation of each instrument.
6. Spare parts:
Service engineers recommend spare parts to users based on the on-site instrument conditions to ensure timely supply.
7. Personalized service:
Our company provides personalized services based on customer needs.