LPY type vertical oil discharge pump (submersible pump)

NegotiableUpdate on 09/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Introduction: Product Overview: LPY Vertical Exhaust Pump is mainly suitable for transporting petroleum products such as crude oil, gasoline, diesel, and other media with similar physical and chemical properties at temperatures not exceeding 80 ℃. The design and manufacturing of this pump comply with GB/T3215-1982 "Centrifugal Pump for Refinery, Chemical, and Petrochemical Processes" ..

Product Details

Product Overview:

The LPY vertical oil discharge pump is mainly suitable for transporting petroleum products such as crude oil, gasoline, diesel, and other media with similar physical and chemical properties at temperatures not exceeding 80 ℃. The design and manufacture of this pump comply with the requirements of GB/T3215-1982 "General Technical Conditions for Centrifugal Pumps Used in Refineries, Chemical and Petrochemical Processes". This type of pump (excluding LPY6-25 pump) rotates clockwise when viewed from the motor, while LPY6-25 pump rotates counterclockwise

LPY型立式排油泵(潜液泵)

Rotate clockwise.

Structure and characteristics:

LPY type pump is a vertical submersible oil pump, which can be divided into single-stage, two-stage or multi-stage. The multi-stage pump is segmented and the axial force is balanced

Drum balance, the rest use double ring, balance holes balance axial force, and the remaining axial force is generated by the thrust in the bearing components located above the pump seat

Bearings bear. The impeller shaft of this type of pump is supported by excellent sliding bearings located near the impeller and in the middle bearing frame.

This type of pump has the following characteristics:

1. It can simplify the pipeline device of the pump, reduce pipeline accessories such as bends, facilitate installation, and occupy a small area.

2. The Ex explosion-proof motor with explosion-proof rating dIIBT4 is adopted, which has excellent explosion-proof performance and can work outdoors without building a pump room. It can be installed in the dirty oil tank for operation

Significantly reduce infrastructure investment and operating costs.

3. The pump shaft seal adopts excellent mechanical sealing and is directly driven by the motor. It has the characteristics of long service life, high efficiency, and low vibration, and runs smoothly, safely and reliably.

4. Adopting a ternary optimization design, the flow channel is subjected to hydraulic polishing to increase the efficiency of the pump.

5. The impeller is immersed in the pumped liquid, and there is no need to pump it when starting, making it easy for automation control.

Performance parameters of LPY vertical oil discharge pump (submersible pump):	Model number	Flow Capacity m3/h	Total Head m	Speed (r/min)	Motor Power kw
Pump efficiency%	6	15	2950	2.2	45
LPY6-15×1	6	30	2950	2.2	45
LPY6-15×2	6	45	2950	2.2	45
LPY 6-15×3	6	60	2950	3.0	45
LPY 6-15×4	6	75	2950	4.0	45
LPY 6-15×5	6	90	2950	4.0	45
LPY 6-15×6	6	105	2950	5.5	46
LPY 6-15×7	6	120	2950	5.5	46
LPY 6-15×8	6	135	2950	7.5	46
LPY 6-15×9	6	150	2950	7.5	46
LPY 6-15×10	6	165	2950	7.5	46
LPY 6-15×11	6	180	2950	7.5	46
LPY 6-15×12	12	158	2950	3.0	52
LPY 12-15×1	12	30	2950	3.0	52
LPY 12-15×2	12	45	2950	4.0	52
LPY 12-15×3	12	60	2950	5.5	52
LPY 12-15×4	12	75	2950	7.5	52
LPY 12-15×5	12	90	2950	7.5	54
LPY 12-15×6	12	105	2950	7.5	54
LPY 12-15×7	12	120	2950	11	54
LPY 12-15×8	12	135	2950	11	54
LPY 12-15×9	12	150	2950	11	54
LPY 12-15×10	12	165	2950	15	54
LPY 12-15×11	12	180	2950	15	54
LPY 12-15×12	12	195	2950	15	54
LPY 12-15×13	12	210	2950	20	62
LPY12-15×14	25	25	2950	7.5	62
LPY 25-25×1	25	50	2950	7.5	62
LPY 25-25×2	25	75	2950	11	62
LPY 25-25×3	25	100	2950	15	62
LPY 25-25×4	25	125	2950	18.5	62
LPY 25-25×5	25	150	2950	22	62
LPY 25-25×6	25	175	2950	22	62
LPY 25-25×7	25	200	2950	30	62
LPY 25-25×8	25	225	2950	30	62

LPY 25-25×9

Performance parameters of LPY vertical submersible multi-stage oil pump (submersible pump):	Model number	Flow Capacity m3/h	Total Head m	Speed (r/min)	Motor Power kw
Pump efficiency%	6	25	2950	LPY6-25×1	45
YB 2.2	6	50	2950	3.0	45
LPY6-25×2	6	75	2950	4.0	45
LPY 6-25×3	6	100	2950	5.5	45
LPY 6-25×4	6	125	2950	7.5	45
LPY 6-25×5	6	150	2950	11	45
LPY 6-25×6	6	175	2950	15	46
LPY 6-25×7	6	200	2950	18.5	46
LPY 6-25×8	6	225	2950	22	46
LPY 6-25×9	6	250	2950	30	46
LPY 6-25×10	6	275	2950	37	46
LPY 6-25×11	6	300	2950	45	46
LPY 6-25×12	12	25	2950	3.0	52
LPY 12-25×1	12	50	2950	4.0	52
LPY 12-25×2	12	75	2950	5.5	52
LPY 12-25×3	12	100	2950	7.5	52
LPY 12-25×4	12	125	2950	11	52
LPY 12-25×5	12	150	2950	15	54
LPY 12-25×6	12	175	2950	18.5	54
LPY 12-25×7	12	200	2950	22	54
LPY 12-25×8	12	225	2950	37	54
LPY 12-25×9	12	250	2950	45	54
LPY 12-25×10	12	275	2950	55	54
LPY 12-25×11	12	300	2950	75	54
LPY 12-25×12	12	325	2950	90	54
LPY 12-25×13	12	350	2950	110	62
LPY12-25×14	25	25	2950	5.5	62
LPY 25-25×1	25	50	2950	7.5	62
LPY 25-25×2	25	75	2950	11	62
LPY 25-25×3	25	100	2950	15	62
LPY 25-25×4	25	125	2950	18.5	62
LPY 25-25×5	25	150	2950	22	62
LPY 25-25×6	25	175	2950	22	62
LPY 25-25×7	25	200	2950	30	62
LPY 25-25×8	25	225	2950	30	62

LPY型立式排油泵(潜液泵)