-
E-mail
sales@lingyukeji.com
-
Phone
15320105518|18920902093|18920413023
-
Address
Workshop on the right side of the first floor of the scientific research building in Zhonglian Industrial Park, Xiqing District, Tianjin City
Product Categories
Tianjin Lingyu Technology Co., Ltd
LPS-N6 intelligent pressure switch
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Suitable for measuring pressure values of liquids, gases, or vapors, with integrated switch control, local display, and remote signal transmission functions. Button operation sets action values and action modes. The switch outputs PNP and NPN switch signals. Commonly used for: 1. Air compressor start stop control; 2. Hydraulic station pipeline pressure high and low limit alarm, interlock start stop pump, etc. The pressure switch directly outputs the switch signal, and the function can achieve pressure transmitter+PLC/control instrument output switch control. This product has the following features: ● Multi channel switch output ● Local display of pressure value ● Tolerance to pulsating pressure impact ● Button setting action value
Product Details
product overview Product overview
The LPS-N6 series electronic pressure switch is an axial display type pressure switch, with a tilted display surface that can monitor the display screen both vertically and horizontally. Functionally, it can collect pressure values of on-site pipelines and pressure vessels, display them locally, output switch actions, and transmit signals remotely, facilitating subsequent control and collection. The local switch control output is a dry contact SPDT or PNP/NPN switch signal, and the analog output supports 4-20mA current signal. Compared with mechanical pressure switches, it is very convenient to adjust the set value. At the same time, it can set multiple modes of single point alarm, alarm within the upper and lower limit range, and alarm outside the upper and lower limit range. Widely used in industries such as petroleum, chemical, metallurgy, water treatment, hydraulic equipment, lubrication equipment, etc. that require pressure control
performance index TECHNICAL PARAMETERS
Power supply: 18~32VDC, typical value: 24VDC
Measurement media: oil, water, gas, and other media compatible with stainless steel;
Measurement range: Negative pressure type: -0.1~0Mpa; Micro pressure type: 0-2KPa; Positive pressure type: 0-60Mpa; (Higher requirements can be customized)
Measurement accuracy: 0.25% FS; (higher accuracy can be customized)
Overload capacity: 2 times full load pressure:
Analog output: 4-20mA, 0-10V;
Switch output: 2-channel PNP/NPN switch;
Contact capacity: 250VAC, 3A/24VDC 1A;
Load capacity: current type ≤ 500 Ω, voltage type ≥ 250K Ω;
Threaded interface: M20 * 1.5 (customizable on site);
Electrical interface: M20 * 1.5 standard outlet hole, including locking wire busbar;
Temperature drift coefficient: Within the specified working temperature, for every 10 ℃ change in ambient temperature, the output change is ≤ ± 0.05% of the range, and the annual drift is ＜ ± 0.3%
Long term stability: ± 0.1% FS/year;
Shell material: die cast aluminum, epoxy resin coating, with sealing gasket
Shell protection: IP65
Explosion proof rating: Exd IIC T6Gb;
Working temperature: -20~85 ℃
Storage temperature: -40~100 ℃
Relative humidity: 0-95% RH
External dimensions APPEARANCE OF SIZE
The materials are being prepared ..
INSTALLATION REQUIREMENTS INSTALLATION
The materials are being prepared ..
