LHN50M European standard electric slide table

LHN50M Electric Sliding Platform Seriesproduct description

LHNElectric sliding tableThe series linear positioning unit consists of square aluminum profiles with hard cylindrical steel rails on both sides and an electric sliding table. The sliding table is equipped with rollers on both sides that can freely run on cylindrical steel rails and move in a straight line under the drive of a synchronous belt. The synchronous wheel mechanism installed on the slide table uses maintenance free ball bearings, and the bearing installation holes are formed in one go. The belt tension can be adjusted by a simple device installed at the end of the profile. The slider is equipped with oil box structures at both ends, which can self lubricate the guide rail during the operation of the slide table, reducing maintenance difficulty and improving reliability.

LHN50M Electric Sliding Platform SeriesProduct selection parameters

●Itinerary: Customizable according to needs, with a maximum length of 5700mm for a single piece and the ability to connect multiple pieces.
●Installation method of slide mechanism: Install other mechanisms through the screw holes on the slide.
●Linear unit installation method: Fix the linear unit through T-slots or screw holes, or use LHN installation accessories.
●Synchronous belt model: S5M synchronous belt reinforced with steel wire, without buffering during reversing, with a repeat positioning accuracy of 0.1mm.
●Installation of induction switch; No additional installation accessories are required, supporting direct connection between induction switches and module profiles, suitable for photoelectric switches (PM-Y44), magnetic switches (D-M9N), and proximity switches (TL-W3MC1).

●Motor installation: It can adapt to the installation of stepper motors of various brands such as 42, 57, 86, as well as servo motors of 100W, 200W, 400W, 750W, etc. Support direct connection between motors and modules to reduce the space occupied by motor installation.