-
E-mail
info@hioki.com.cn
- Phone
-
Address
Room 4705, Raffles Plaza, 268 Xizang Middle Road, Huangpu District, Shanghai
Product Categories
- Grounding resistance meter, voltage tester, phase sequence meter
- Noise meter, tachometer, illuminance meter
- Automatic Test Equipment
- Recorder (oscilloscope recorder, storage recorder)
- Clamp sensor
- Electric meter relay, inverter
- Environmental measurement system
- Data acquisition device
- clamp meter
- Optical power meter, LAN line tester
- Desktop multimeter
- LCR tester
- Photovoltaic panel, power generation, PV maintenance tester
- Impedance Analyzer
- ohmmeter
- Recorder, data acquisition device
- other
Rizhi (Shanghai) Measurement Technology Co., Ltd
LCR tester IM3523
NegotiableUpdate on 03/24
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
● Basic accuracy of 0.05%, wide measurement range (DC, 40Hz-200kHz, 5mV-5V, 10A-50mA) ● Under mixed measurement conditions such as C-D and ESR, it can continuously test products at 10 times the speed of previous products. ● Built in comparator and BIN function ● 2ms fast testing time
Product Details
 |
 |
 option |
 option |
 option |
 |
Ideal choice for application in production lines and automated testing fields
Basic accuracy ± 0.05%, wide measurement range (DC, 40Hz~200kHz, 5mV~5V, 10 μ A~50mA)
Under mixed measurement conditions such as C-D and ESR, the product can be tested continuously at a speed 10 times faster than before.
● Built in comparator and BIN function
A rapid testing time of 2ms
This product does not come standard with measuring probes and testing fixtures. Please select and purchase suitable measuring probes and testing fixtures separately based on the application. All probes are equipped with a 1.5D-2V coaxial cable. RS-232C interface connection: Cross cables can be used for interactive connections. You can use RS-232C cable 9637 without the need for a hardware controller.
LCR tester IM3523 measurement method: continuous measurement under different conditions
LCR tester IM3523 measurement method: continuous measurement under different conditions
We hope to measure C-D at 120Hz under the measurement conditions of capacitance. I hope to measure ESR at 100kHz. At this point, use one device to continuously measure different conditions.
LCR tester IM3523 measurement method: smooth panel reading function for changing production line settings
LCR tester IM3523 measurement method: smooth panel reading function for changing production line settings
In order to use one LCR tester to measure multiple products, it is required to efficiently change the settings.
The panel saving function of IM3523 is even more advanced, with up to 60 sets of measurement conditions saved, as well as 128 compensation values for open/short circuit compensation and line length compensation. Use the panel function to read the saved measurement conditions. In addition to manual reading, external control ports can be used to control the reading of panel numbers, thus reducing the time required to build automated inspection production lines.
Reliable production line inspection: contact inspection function
Reliable production line inspection: contact inspection function
Check for poor contact between samples during measurement of the 4 terminals.
Measure the contact resistance between LPOT~LCUR and HPOT~HCUR. If it is above the set threshold, an error will be displayed.
Precision calculation software
Precision calculation software
Simply input numerical values to easily calculate accuracy.
LCR tester accuracy calculation software, please click
