LBQ-1200P Programmable Core Automatic Cutting System

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The LBQ-1200P programmable core automatic cutting system is one of our main products. The core liquid nitrogen cutting machine is divided into six parts: core cutting system, core workbench system, core fixture system, liquid nitrogen cooling system, chassis frame system, and automatic control system. All systems are coordinated and operate reliably under the scheduling of the control center; Real time monitoring and display of key work data (such as cutting speed, working speed, cutting length, etc.), and transmission to the control center, and real-time display of simulated work status; Reliable safety protection devices (such as knife jamming alarm, abnormal operation alarm, double limit protection switch, leakage)

Product Details

LBQ-1200PType programmable core automatic cutting system

LBQ-1200P型程控岩心自动剖切系统

Product Introduction

LBQ-1200PType programmable core automatic cutting systemIt is one of the main products of our factory. The core liquid nitrogen cutting machine is divided into six parts: core cutting system, core workbench system, core fixture system, liquid nitrogen cooling system, chassis frame system, and automatic control system. All systems work in coordination under the unified scheduling of the control center, ensuring reliable operation;Key work data(Such as cutting speed, working speed, cutting length, etc)Real time monitoring, display, and transmission to the control center, and the ability to display simulated working status in real time;Reliable safety protection device(Such as knife jamming alarm, abnormal operation alarm, double limit protection switch, leakage protection, emergency stop button, etc);The overall structure of the equipment is reasonable, with low noise, easy operation and maintenance, stable performance, and advanced technology;Meet international and domestic requirements for safety, energy conservation, and environmental protection.

Technical specifications:

parameter category	Parameter content
Core specifications	diameter50~140mmLength1200mm
Cutting blade	Φ460×Φ50×3×4×32mm(Outer diameter of blade) 460, inner diameter 50，3432 Thickness tooth thickness tooth length
Cut thickness	15cm
Double blade spacing	10mmThe15mmThe20mm
Single blade cutting	can be½、⅓Cut at the designated location
Cutting feed rate	0~1000mm/min(Speed automatically adjusts based on resistance)
Cutting time	≤5min
Cutting positioning accuracy	≤±0.1mm
Variable frequency main motor	Imported servo control, maximum speed2000r/min, Power:7kw
Core worktable	lifting height 1015cmMoving forward and backward:010cmMoving speed0~1000mm/minadjustable
Automatic control intelligence	Real time monitoring of key work data and real-time display of simulated work status; Equipped with safety warning function
cooling system	Liquid nitrogen, air, water, pipelines and fittings are made of low-temperature resistant materials, and liquid nitrogen switches are sensitive and reliable; Liquid nitrogen and air can mix effectively to cool down the blade
Core compaction mechanism	Manual and pneumatic replaceable
Box shell material	SUS304Stainless steel, spray anti-corrosion treatment
working hours	continuous
operating noise	less than 70 Decibel, in compliance with the noise hygiene standards for industrial enterprises

Attention: Our company is always committed to innovation and improvement of product performance and functionality, and for this reason, product technical specifications may also change accordingly. The above situation will not be notified separately, and our company reserves the right of modification and final interpretation.