Kuhn PERFormer Combined Land Preparation Machine

Product features of Kuhn PERFORMER combined soil preparation machine

**For advanced various functional features

The situation of each farmland is different, and we need to consider soil texture and structure, previously planted crops, and current seasons in order to carry out targeted cultivation. The PERFORMER, a multifunctional comprehensive hand, can fully meet the different requirements mentioned above. This machine can adapt to your various working conditions, thus helping you achieve the best farming results.

Realize efficient cultivation through 'one-step approach'

When the climate cycle suitable for cultivation is very short and you need to prepare for a one-step soil tillage operation after harvesting, please use the fully equipped PERFORMER.

The front disc can cut straw and roots. Elastic teeth are used for deep plowing and mixing, thereby burying straw in the soil. The elastic teeth adopt 80mm tooth tips. Compared with traditional craftsmanship, it has low consumption and only requires one machine and one driver. Through a one-step operation mode, it achieves very economical farming operations.

In autumn plowing, if the soil is not compacted, in order to achieve natural fragmentation of soil blocks due to frost, you can use a machine without rollers. In this case, you need to use depth limiting wheels to control the plowing depth, and the elastic teeth on the back of each depth limiting wheel can also wipe off the ruts.

The weight of the rollers on the wheels can also be reduced to be suitable for lightweight soil and relatively humid environments.

Realize surface stubble removal cultivation and soil loosening through one-step in place operation

If your farmland requires deep plowing operations without excessive disturbance Please install a 50mm wide loose soil tooth tip on the spring teeth.

In one go, the disc can perform high-quality stubble removal and cultivation operations on any type of residue, and then use teeth to loosen the soil. The depth of the operation can reach 35 centimeters, which can retain fine-grained soil on the soil surface and loosen the soil without causing too much disturbance. By implementing the above operations, you can maintain the productivity of the land while also retaining organic matter on the soil surface, making your soil more fertile. Compared to traditional loose soil, using 50mm tooth tips can save on tillage workload.

Shallow plowing homework

If you need to minimize soil work as much as possible in order to retain organic matter on the soil surface while only decomposing the ground cover area. Please use a PERFORMER equipped with a combination of discs and winged teeth for shallow tillage and stubble removal. The disc can perform high-quality stubble removal and tillage operations on any type of residue, while the tooth tips can remove crop roots along the width direction of the machine, resulting in better mixing effects for the curved teeth. By using a combination of discs and teeth, all weeds can be eliminated. In this configuration, you can perfectly combine work quality to achieve high operational efficiency while also fully utilizing your land.

Efficient mixing achieved solely through the use of spring teeth

**Maximizing the versatility of machines!

You can use only the spring teeth like using CULTIMER. From using tooth tips for stubble cutting and plowing to using 80mm tooth tips for semi deep mixing operations, all you need to do is replace vulnerable parts to fit the job requirements you need to perform, it's that simple. Nowadays, the widely recognized curved CUTIMER teeth, which can achieve efficient mixing, have been further enhanced in function through curved baffles.

Only using discs to achieve high-speed stubble cutting and cultivation

**Maximize the versatility of the machine! The machine can achieve high-speed stubble cutting and cultivation using only a disc. Double row 510mm independent discs are used to cut straw and plant roots to accelerate their decomposition. By densely mixing at a few centimeters on the surface, organic matter can be retained on the soil surface, thereby increasing soil fertility.

4 major module linkage effects

Two rows of discs achieve efficient cutting

Double row discs are used to cut straw and mix it into the surface soil. The independent disc is equipped with wheel hubs connected by bolts, achieving lifelong lubrication and reducing machine maintenance. The disc, with a diameter of 510 millimeters, a slightly curved contour, and grooves, can achieve uniform and consistent stubble cutting and cultivation across the entire working width of the machine. A thickness of 6 millimeters ensures reduced wear and achieves unparalleled longevity.

4 rows of elastic teeth can achieve deep plowing mixing or soil loosening

The teeth are arranged in 4 rows, which can improve the clearance of debris between the teeth and below the frame. The teeth in each row are spaced 28 centimeters apart.

A horizontal gap of 15 centimeters allows the teeth to operate efficiently in rocky conditions. Curved and slanted wide baffles can achieve excellent mixing effects.

Due to the use of a new dual spring mechanical uninterrupted safety protection system, the teeth can maintain a constant operating depth. In any type of soil, especially rocky soil, a tooth tip pressure of 600 to 800 kilograms can ensure uniform operation.

From multiple optional vulnerable parts:

• Using 80mm tooth tips can loosen soil
• A 50mm tooth tip can be used for soil crushing
• The use of wings can achieve optimal cutting of crop roots
• Tooth tips and hard alloy wings can improve the service life in difficult to cultivate soil

Perform precise leveling operations from the driver's seat

The disc can be continuously leveled during movement, making it suitable for various land conditions at any time. The disc is equipped with a rubber safety device and installed on maintenance free bearings, making it fully suitable for all rocky soils.

Unparalleled three-way compaction effect

The new HD Liner 700 heavy-duty roller has a compaction capacity of 225 kilograms per meter, and its V-shaped structure can spread pressure in both vertical and inclined directions, allowing for deep compaction down the entire length of the roller. The roller can rotate normally even under humid conditions due to its groove shape and a larger diameter of 700 millimeters. The V-shaped structure formed in the soil can reduce water loss. The surface soil between two disks will not be compacted. This can maintain its rough structure without ensuring good infiltration of moisture.

Easy and convenient to set up

All settings are controlled through hydraulic control in the tractor cab, ensuring comfortable operation of the machine. You can intervene and adjust at any time to change the working depth of the trenching disc 2, achieving optimal cutting and mixing operations. Similarly. Flat disc 3 can also achieve excellent leveling adjustment. The teeth are fixed on the frame, so the depth of the teeth can be adjusted through the machine's journey. The rod cylinder 1 and roller cylinder 5 can adjust the depth of the teeth to keep the machine in an optimal position during operation. The night pressing function is integrated into the KTH105 4 hydraulic selector 4, which only requires 2 double acting valves.

More possibilities

Choosing a user-friendly ball joint linking device can better adapt to different tractors.

Crop coverage sowing can optimize soil preparation work through a one-step operation and synchronize the sowing of crop vegetation. The SH with a capacity of 200 or 380 liters gives you greater autonomy to carry out different operations, and you can also sow rapeseed in one step.

Technical parameters of Kuhn PERFormer soil preparation machine

Product Information of Kuhn PERFormer Joint Land Preparation Machine（）