Kuhn GA7932 Rake

Product Introduction of Kuhn GA7932 Rake

1、 Specially designed for small and medium-sized farms with poor conditions

GA 6632、 The 7932 and 9032 side rakes are designed for small and medium-sized farms with poor working conditions and can be connected to low-power tractors. Their versatility and performance will surprise you. The rear rotor position of these traction rakes can be modified to achieve variable working width. Other key features include a variety of rotor diameters to choose from, MASTERDRIVE GIII gearbox suitable for high-intensity operations, multiple grazing functions, excellent ground profiling, and more!

Three models that meet different needs

G6632 is suitable for medium-sized farms

-Suitable for high-intensity use

-Using a small rotor can improve ground profiling

-Transportation width less than 3.00 m (9'10 ")

-The width after removing the toothed arm is only 2.08 m (6'9 ")

GA7932

-The best choice when allowed on the road, with a transport width of 3.50 meters

-Grass strip width suitable for large capacity balers

-Very cost-effective

GA9032

-The largest lateral rake in the market

-The working width at two grass bar positions can reach 8.80 m

-Unparalleled cost-effectiveness

Widening during work, while narrowing during transportation and storage!

It is easy to switch the rake from the working position to the transport position inside the tractor cab.

The width of GA 6632 can be reduced to 3.00 m (9'10 "), GA 7932 can be reduced to 3.50 m (11'5"), and GA 9032 can be reduced to 4.10 m (13'4 "). In addition, these three models also have detachable arms, which can improve driving comfort and safety during long-term transportation in difficult to access locations or storage areas.

2、 The important function of improving comfort

Grass width hydraulic adjustment

The hydraulic cylinder allows for easy adjustment of grass strip width inside the cab. The system can also fold screen components for transportation without the need for tedious manual operations.

If two grass strips are formed, another manually controlled screen can be installed on the front rotor as an optional device.

Excellent grass gap

The tooth lifting height of GA 6632/7932 is close to 50 cm (22 "), while the tooth lifting height of GA 9032 is 60 cm (24"), so it will not damage the newly formed grass when passing through it.

Parallelogram traction rod attachment device

It is very easy to connect the rake to the tractor through a tow bar equipped with an adjustable rack. To prevent interference with the tractor connection, regardless of the rotor height, the front of the tow bar is always in a horizontal position.

Independent rotor

The pivot point located on chassis 1 allows two rotors to independently perform ground profiling. In addition, the rear rotor is also equipped with a 3D suspension device as standard, aimed at reducing grass pollution.

Super Balloon Wheel

The large-diameter super balloon wheel 2 on the two rotors is located near the range of the spring teeth for grazing, which can achieve excellent crop picking with minimal contact with the soil.

3、 Specially designed to achieve stability under various conditions

These three models are firmly supported on a very large chassis, with an additional six wheels per rotor, making it easy to operate in various fields and crop conditions.

standard configuration

The two wheel chassis is a standard configuration for the GA 6632 front rotor.

Bogie axle

The bogie shaft is a standard configuration for the two rotors of GA 7932 and GA 9032, and is an optional configuration on GA 6632. They can run very smoothly on bumpy roads and uneven grasslands (for example, after damage caused by prey or after use in pastures).

Supplementary axis

GA 6632、 The rear rotors of 7932 and 9032 are equipped with two additional wheels. This supplementary shaft is an option on the front rotors of GA 6632 and 7932.

Technical parameters of Kuhn GA7932 rake