Kenafu sewage online monitoring, sewage monitoring system, pollution source monitoring system, discharge wastewater monitoring

Kenafu sewage online monitoring, sewage monitoring system, pollution source monitoring system

Kenafu sewage online monitoring, sewage monitoring system, pollution source monitoring system, and discharge wastewater monitoring areIncluding water temperature pH、 Conductivity, turbidity, dissolved oxygen CODcr、 An online automatic monitoring and analysis system for indicators such as ammonia nitrogen, total phosphorus, and total nitrogen, water sample collection and pretreatment unit, collection and monitoring software, and management information control software. The entire system adopts modular and modular design. The system meets the development needs of online monitoring of national wastewater, and continuously and automatically monitors the water quality of pollution source discharge enterprises and wastewater treatment plants in industries such as petrochemicals, building materials, metallurgy, papermaking, printing and dyeing, food, and electroplating. It complies with the requirements of the Environmental Testing Quality Assurance System of the State Environmental Protection Administration and provides a reliable basis for implementing total control and pollutant discharge fees for pollution source wastewater and water environment management.

Kenafu sewage online monitoring, sewage monitoring system, pollution source monitoring systemOn site automatic monitoring facilities: As the most basic part of the pollution source automatic monitoring system, it is installed at the various discharge outlets of polluting enterprises to automatically monitor the real-time emission of pollutants and the operation of pollution control facilities. It is the source of data. The equipment includes a conventional five parameter analyzer for monitoring water pollution sourcesCODcrAnalyzer, ammonia nitrogen analyzer, total phosphorus analyzer, total nitrogen analyzer A data acquisition and transmission device used to transmit data to the monitoring center.

Technical requirements for station building design

① Power supply:three-phase five-wire50Hz 15-20kWInstall three-phase AC voltage stabilizer, distribution box, and separate lighting electricity; Electricity consumption for pumps; Electricity consumption for instruments and instrument control cabinets.

② Grounding wire: 2Root groundingResistance ＜4Ω

③ Water supply (tap water): 3/4 "The2.5barTurbidity<0.2NTUIf there is no tap water to extract river water or well water as water supply, it must be pre treated to meet the requirements for producing pure water. The water supply system should have self-control function and a high-level water tank with self-control function（1m3---1.5m3）.

④ Phone lines: 2Road1Dedicated for road communication data transmission1The road is used for communication.

⑤ Smoke and flame alarms, fire extinguishing equipment.

⑥ Discharge pipe trench, anti-skid floor tiles are laid inside the station building, and floor drains are installed around the perimeter. There are open discharge trenches around the station building. Discharge the wastewater downstream of the sampling wharf (if any).

⑦ The sampling port is equipped with warning signs and warning lights.

⑧ The height (net height) of the station building shall be adjusted according to the actual situation, including the instrument room and auxiliary equipment room.

⑨ The station building should be equipped with waste liquid collection design, and it is required to be constructed synchronously with the station building civil engineering.

⑩ Install an independent distribution cabinet in the station building, and install an air switch leakage protection system and a separate electricity meter. A total of 20 units need to be installed in the station buildingSet up a power interface for future instrument installation.