-
E-mail
kesenyiqi@163.com
- Phone
-
Address
108 Wanjie Road, High tech Industrial Development Zone, Zibo City, Shandong Province
Product Categories
- Petroleum product kinematic viscosity tester
- Building exterior wall insulation and energy-saving detector
- Condensation point tester
- Acid value tester
- Oil and synthetic liquid emulsion resistance tester
- Automatic interface tension meter
- Water soluble acid analyzer
- Asphalt oil stain container cleaning device
- Volume resistivity
- Open flash point tester
- Automatic dielectric strength tester for insulating oil
- Low temperature stability tester
- Spontaneous combustion point tester
- Closed flash point tester
- Volumetric moisture analyzer
- Laser Particle Size Analyzer
- Automatic Distillation Range Tester
- Fully automatic rotating oxygen bomb value tester
- Micro moisture analyzer
- Multi functional oscillator
- Heavy oil solid content analyzer
Shandong Sanmu Kesen Instrument Co., Ltd
KSD-1 type open flash point tester
NegotiableUpdate on 06/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The KSD-1 open flash point tester is suitable for the test methods of international standard ISO2592 and American Society for Testing and Materials standard ASTMD92, and is used to determine the flash point and ignition point of petroleum products and asphalt, except for fuel oil and asphalt with an open flash point not lower than 79 ℃.
Product Details
The KSD-1 open flash point tester is suitable for the test methods of international standard ISO2592 and American Society for Testing and Materials standard ASTMD92, and is used to determine the flash point and ignition point of petroleum products and asphalt, except for fuel oil and asphalt with an open flash point not lower than 79 ℃.
Technical Parameter
Power supply: AC220V ± 10% 50Hz
Heating device: electric furnace heating, no open flame, power 0-700W continuous
Scanning device: automatic scanning
Temperature gauge: -6-400 ℃, with a division of 2 ℃, in accordance with the technical requirements of GB/T514 for liquid thermometers used in petroleum product testing
Ignition device: A Ignition source: Gas (or other civilian combustible gas)
B nozzle aperture: 0.6-0.8mm
Applicable temperature: -10 ℃ -50 ℃
Applicable humidity: ≤ 85%
