KRACHT gear pump KP series original stock

KRACHT gear pump KP series original stock

Noise and vibration: If the pump produces abnormal noise or vibration during operation, it may be due to worn internal gears, damaged bearings, or improper installation of the pump body. Check if the gear clearance is appropriate, if the bearings need to be replaced, and if the pump body is securely installed.

Insufficient flow: Insufficient flow may be caused by internal wear of the pump, damaged seals, or insufficient oil suction. Check the gear clearance, replace worn gears or seals, and ensure that the oil suction port is not blocked and the oil suction pipeline is not leaking.

Insufficient pressure: If the pump output pressure is lower than the specified value, it may be due to internal leakage, improper safety valve settings, or severe pump wear. Check for internal leaks, adjust or replace safety valves, and replace worn gears if necessary.

High temperature: When the pump is running, the high temperature may be due to overload, cooling system failure, or excessive internal friction of the pump. Check if the motor load is normal, if the cooling system is working properly, and if there is excessive wear inside the pump.

Unable to suck oil: The inability to suck oil may be due to blockage of the suction pipeline, improper position of the suction port, or internal wear of the pump. Check if the oil suction pipeline is unobstructed, if the oil suction port is in the correct position, and if the internal gears and seals of the pump need to be replaced.

Leakage: Pump leakage may be caused by damaged seals, loose fasteners, or cracks in the pump body. Check if all seals are intact, if fasteners are tightened, and if there are visible cracks or damage on the pump body.

Motor overload: Motor overload may be due to improper pump selection, high system pressure, or excessive internal friction of the pump. Check if the pump selection meets the system requirements, if the system pressure is within the rated range of the pump, and if there is excessive wear inside the pump.

When conducting fault analysis, it is necessary to first cut off the power supply to ensure safe operation.

Regular maintenance and upkeep are essential to ensure the long-term stable operation of the KRACHT gear pump KP series.

Regularly check the oil: ensure the cleanliness of the oil and the appropriate oil level. Oil contamination or low oil level can affect the performance and lifespan of the pump. It is recommended to use oil that matches the pump and replace it regularly.

Check connectors: Regularly check the fastening of all connectors to ensure there is no looseness. Especially at the connection between the oil suction pipe and the oil discharge pipe, looseness may lead to leakage or inability to suck up oil.

Monitoring operating temperature: The pump should avoid prolonged exposure to high temperatures during operation. If abnormal temperature is found, the operation should be stopped immediately and the cooling system should be checked for normal operation, as well as whether there is excessive wear inside the pump.

Check the motor and electrical connections: Regularly inspect the condition of the motor and electrical connections to ensure that there is no overheating or damage. The overload protection device of the motor should also be checked regularly to ensure its normal operation.

Replace vulnerable parts: According to the usage of the pump and the recommendations in the maintenance manual, regularly replace vulnerable parts such as seals, bearings, etc. to prevent malfunctions.

Record maintenance history: Record detailed information about each maintenance and upkeep, including replaced parts, identified issues, and corrective actions taken. This will help analyze the operation status of the pump, predict potential problems, and provide reference for future maintenance.

Effectively extend the service life of KRACHT gear pump KP series and reduce downtime caused by malfunctions. When carrying out any maintenance and upkeep work, please be sure to follow the safety operating procedures to ensure the safety of the operators. If you have any questions or encounter complex problems, it is recommended to contact professional technical personnel for assistance.

KRACHT gear pump KP series original stock

Shanghai Weite Rui's advantage brands include

Pneumatic components:

German brands: FESTO pneumatic components from Germany, BURKERT solenoid valves from Germany, Heilong Norgren from Germany;

Japanese brand: SMC pneumatic components, CKD pneumatic components, Koganei pneumatic components, NOK:

Italian brands: UNIVER from Italy, Kangmaosheng from Italy, ASCO solenoid valve from the United States, ROSS from the United States

2： Industrial control products

German brands: PILZ relays, IFM sensors, HEIDENHAIN, BENDER

German P+F sensor, German RENCON encoder; TURCK Turck, Hirschmann Industrial Switches:

3： Hydraulic components

NUMATIC from the United States, PARKER Pneumatic Hydraulic Pressure, VICKERS Vickers from the United States, MOOG from the United States,

FAIRCHILD from the United States, Kosemount Rosemount from the United States, HashHACH from the United States, and Denison Hydraulic Components from the United States Kripa from the United States

HAWE, REXROTH, HYDAC, VSE, KRACHT, and Clark from Germany