KGS-200S

M: The three-axis is fully manual and can be manually controlled for left, right, front, back, and up/down feed according to work requirements, making it easy to operate. The three-axis is fully manual and can be manually controlled for left, right, front, back, and up/down feed according to work requirements. The up/down feed is designed with a large dial, and the minimum feed scale is 0.001mm for easy micro feed operation The main body, worktable, slide seat, column, and machine head of the high rigidity casting body are all made of high-grade cast iron, and have undergone finite element analysis and calculation to meet the engineering requirements of rigidity doubling and quality. Each casting has undergone internal stress elimination treatment to ensure long-term stability and excellent bending and torsional stress resistance, ensuring the long-term machining accuracy of the machine tool. two The sliding steel ball guide structure of the workbench adopts high hardness steel guide rails, which are precision matched and ground, and matched with imported high-precision steel balls selected by the machine. The movement is light, the wear is small, the work efficiency is improved, and the labor intensity of operators is reduced. three Each spindle of our company is fully developed and manufactured by Jiande Factory in Taiwan, with high-precision elastic spindle. From the raw materials of the outer tube to assembly (except for imported bearings), it is assembled in a temperature controlled and dust-free workshop without outsourcing. Because under such strict production conditions, the spindle is less affected by temperature changes, has low noise and no vibration, and can provide years of service without problems. This machine is designed with a flexible spindle, equipped with CP4 grade precision angular ball bearings, V3 grade low vibration motors, and dynamic balancing. It is installed on the head seat to ensure that the spindle deflection is far below 0.002mm. four The manual lubrication system adopts a manual lubrication device, and each transmission screw and sliding surface can receive optimal lubrication, which is not only environmentally friendly but also saves unnecessary expenses on lubricating oil. five The electrical control system is professionally designed to meet CE safety requirements, using internationally renowned electrical components. It operates reliably with low noise and vibration, ensuring the need for high-precision grinding. six The graphical operation panel adopts a fixed design for the operation panel box, and the control is completely centralized on the operation panel, which conforms to ergonomics; The operation panel adopts a graphic design, with clear functions and easy to learn operation. Project Unit KGS-200M KGS-200S Capacity Workpiece Table Size (Length x Width) mm 410x160 Workpiece Table Maximum Movement Left and Right mm 445 Front and Rear mm 220 Worktable to Spindle Center Maximum Distance mm 445 Worktable Maximum Load Capacity Kgs 100 Worktable and Front and Rear Feed Worktable T-shaped Slot mmxN 14x1 Worktable Speed M/min - Front and Rear Handwheel Feed per Square mm 0.02 per Circle mm 4 Front and Rear Automatic Feed Rate mm - Front and Rear Rapid Rate 50 Hz mm/min -60 Hz mm/min - Up and Down Feed per Square mm 0.01 0.001 per Circle mm 2 2 Up and Down Automatic Feed Rate mm - Up and Down Rapid Movement Rate mm/min - Grinding Wheel Spindle Grinding Wheel Size (Outer Diameter x Thickness x Inner Diameter) mm Φ 205 x6-20x Φ 31.75 spindle speed 50 Hz rpm 2850 60 Hz rpm 3360 motor spindle motor hp 2 front and rear motors hp - up and down motors hp - hydraulic motor Hp - flushing motor hp 1/8 vacuum motor hp 3/4 size weight machine height mm. 1645 floor area (length x width) mm. 1610x1120 machine weight (net/gross weight) Kg. 630/780