KETT Kate FD-660 Infrared Moisture Meter

KETT Kate FD-660 Infrared Moisture Meteris JapanKETTMoisture meterFD-610The upgraded product adopts an organic carbon heating rod, which makes the heating more uniform and improves the measurement accuracy. One click start test, simple and easy to understand operation, beginners can quickly get started.

Infrared moisture meterFD-660Suitable for grains, food, chemical products, etc., among which mushroom industry is more commonly used, and the form can detect powders, particles, and liquids.

KETT Kate FD-660 Infrared Moisture MeterAssembly steps:

1、 Unpacking: After unpacking, confirm the type and quantity of the attached product;

2、 Set up the instrument body: Place the product on a flat and stable table that is not easily affected by external vibrations and wind;

3、 Confirm power supply voltage: Confirm whether the power supply voltage switch on the back of the product body is on the voltage side for use;

4、 Installation of windshield cover: Open the heater cover and install the windshield logo facing downwards. If installed correctly, the windshield will not shake and cannot rotate.

5、 Install the sample dish holder: After matching the ▽ mark on the sample dish with the ▽ mark position on the windshield, insert it.

6、 Install sample dish: Gently place the sample dish on the sample dish holder.

7、 Close the heater cover

8、 Connect the power cord:Insert the power cord connector into the power socket on the back of the product body. Then plug in the power cordAC100VInside the socket.

9、 Turn on the power: Set the power switch on the back of the instrument toONThe machine emitsPSound prompt, the screen will be displayed as a whole. Then display“CHE5，CHE4……CHE0At the same time, the instrument will display the automatically determined power supply voltage.

Measurement method: Drying reduction method (heating drying)/Quality measurement method

Sample quality:1-80g/Any quality sampling method

水分/Solid state component:0.1%and0.01%(Replacement). quality5mg

Measuring range:0-100%(Wet basis)•Solid state component)0~500%(Dry basis)

Reproducibility (standard deviation): sample quality5gabove0.1%(According to the measurement conditions and standard samples specified by our company)

Measurement mode: automatic stop mode, time stop mode（1-120Score)

Temperature setting range:30~180℃（1℃Interval)

Display method: BacklightLED（96x40mm）

External output:RS-232Cinterface

Measurement condition preservation:5kind

Heat source:280Wx2Organic carbon heating rod

Function:900W

power supplyAC100~120V/AC220~240（50/60Hz）

size•Weight:222（W）x360（D）x196（H）mmThe3.2kg

Sample tray: made of stainless steel (diameter)110mmDepth11mm）

Accessory: Sample trayx2Sample tray clamp, windproof, sample tray holder, spoon, spare fusex2Aluminum foil dish（10Item), power cord, user manual

Optional accessories: PrinterVZ-330Printing paper（10Roll, aluminum foil dish（500Sample crusher[TQ-100]Deodorization and windproof kit[FW-100]Database software[FDL-02]