KENT Jiande Grinding Machine KGS-618M

M: The three-axis system is fully manual, allowing for manual control of left, right, front, back, and up/down feed according to work requirements, making it easy to operate The main body, worktable, slide seat, column, and machine head of the high rigidity casting body are all made of high-grade cast iron, and have undergone finite element analysis and calculation to meet the engineering requirements of rigidity doubling and quality. Each casting has undergone internal stress elimination treatment to ensure long-term stability and excellent bending and torsional stress resistance, ensuring the long-term machining accuracy of the machine tool. two The fully supported worktable with hard rail structure adopts a fully supported hard rail structure, combined with Turcite-B and manual scraping to ensure that the worktable reduces the damping coefficient under load, ensuring smooth operation and machining accuracy. three Each spindle of our company is fully developed and manufactured by Jiande Factory in Taiwan, with high-precision direct connection spindle. From the raw materials of the outer tube to assembly (except for imported bearings), it is assembled in a temperature controlled and dust-free workshop without outsourcing. Because under such strict production conditions, the spindle is less affected by temperature changes, has low noise and no vibration, and can provide years of service without problems. This machine adopts a direct spindle design, equipped with CP4 grade precision angular ball bearings, V3 grade low vibration motors, and dynamic balancing. It is directly installed on the head seat, which enhances the strength of the head and ensures that the spindle deflection is far below 0.002mm. four The automatic lubrication system adopts a circulating central lubrication device. On the one hand, all transmission screws and sliding surfaces receive optimal lubrication, and on the other hand, waste oil is recovered, filtered, and recycled for lubrication, which is not only environmentally friendly but also saves unnecessary expenses on lubricating oil. five The electrical control system is professionally designed to meet CE safety requirements, using internationally renowned electrical components. It operates reliably with low noise and vibration, ensuring the need for high-precision grinding. six The graphical operation panel adopts a fixed design for the operation panel box, and the control is completely centralized on the operation panel, which conforms to ergonomics; The operation panel adopts a graphic design, with clear functions and easy to learn operation. Project Unit KGS-618M Capability Workpiece Table Size (Length x Width) mm 460x150 Workpiece Table Maximum Movement Left and Right mm 475 Front and Rear mm 185 Worktable to Spindle Center Maximum Distance mm 380 Worktable Maximum Load Capacity Kgs 120 Worktable and Front and Rear Feed Worktable T-shaped Slot mmxN 14x1 Worktable Speed M/min - Front and Rear Handwheel Feed One Square mm 0.01 One Circle mm 3 Front and Rear Automatic Feed Rate mm - Front and Rear Rapid Rate 50 Hz mm/min -60 Hz mm/min - Up and Down Feed Up and Down Handwheel Feed Rate One Square mm 0.005 One Circle mm 1 Up and Down Automatic Feed Rate mm - Up and Down Rapid Movement Rate mm/min - Grinding Wheel Spindle Sand Wheel Size (Outer Diameter x Thickness x Inner Diameter) mm Φ 180x6-20x Φ 31. 75 spindle speed 50 Hz rpm 2850 60 Hz rpm 3360 motor spindle motor hp 2 front and rear motors hp - up and down motors hp - hydraulic motor hp - flushing motor HP 1/8 Vacuum Motor HP 3/4 Size Weight Machine Height mm. 1995 Floor Area (Length x Width) mm. 1800x1200 Machine Weight (Net/Gross) Kg. 700/850