Jierui flame arrester

316L stainless steel pipeline typeJierui flame arresterExhaust pipe hydrogen oxygen acetylene sleeve flashback preventer 1/4NPT

Product Name:Jierui flame arrester

Material:316 stainless steel

Brand: Jierui

Explanation:

Flame arresters, also known as fire extinguishers or pipeline flame arresters, are used to prevent external flames from entering equipment or pipelines containing flammable and explosive gases, or to prevent flames from spreading between equipment or pipelines. It is a safety device used to prevent the spread of flames from media such as hydrogen, oxygen, etc. It is composed of a solid material (flame retardant element) that can pass through gas and has many small channels or gaps. Pipeline explosion-proof flame arrester is a safety device used to prevent the spread of liquid flames and prevent explosions caused by backfire. Usually installed on pipelines that transport or discharge flammable and explosive gases. Such as torches, heating and combustion systems, petroleum gas recovery systems, or other systems.

Stainless steel card sleeve flame arrester is used when flames pass through narrow pores of thermal conductorsDesigned and manufactured based on the principle of extinguishing due to heat loss. The flame retardant layer structure of the flame arrester can be gravel type (316) metal wire mesh type or corrugated type.

Main purpose:

1. On pipelines transporting flammable gases.

2. Torch system.

3. Oil and gas recovery system.

4. The pipe network for heating furnace fuel gas.

5. Gas purification and chemical system.

6. Gas analysis system.

7. Coal mine gas emission system. Main performance: 1. The flame arrester has undergone 13 consecutive subsonic flame tests and is able to prevent the flame from passing through each time.

In order to ensure the safe use of the flame arrester performanceFire arresters should be regularly inspected and maintained.

1. The flame arrester should be inspected every six months to check whether the flame arrester core is blocked, deformed, corroded, etc.

2. The blocked fire-resistant layer core should be cleaned thoroughly to ensure that each hole on the core is unobstructed, and any deformed or corroded fire-resistant layer should be replaced.

3. When reinstalling the fire-resistant layer core, it should be ensured that the joint surface is tight and there is no air leakage.