Japanese Gongli 3125A Insulation Resistance Tester

NegotiableUpdate on 12/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The KEW3125A digital high-voltage insulation resistance meter is a high-voltage insulation resistance meter with 5 ranges (3125A) and 4 ranges (3025A) for measuring insulation resistance.

Product Details

KletsKEW3125A Digital High Voltage Insulation Resistance MeteryesHigh voltage insulation resistance meter with 5 ranges (3125A) and 4 ranges (3025A) for measuring insulation resistance.
Design in compliance with international safety standards:
IEC 61010-1, -2-030 (CAT III 600V/CAT IV 300V Pollution Level 2)
IEC 61010-031 (Requirements for Handheld Probes)
Automatic discharge function: When testing the insulation resistance of capacitive loads, the charging charge is automatically released after measurement. The discharge state can be confirmed in voltage mode.
The backlight function is convenient for working in low light or at night.
A bar chart displays the measurement results.
Warning signs and buzzing warnings for live lines.
Automatic shutdown function: To avoid battery waste caused by forgetting to shut down, the instrument will automatically shut down when there is no operation for 10 minutes after measurement.
Automatic measurement and PI measurement (polarization index measurement), DAR measurement (induced absorption ratio measurement).

KletsKEW3125A Safety Standard for Digital High Voltage Insulation Resistance Meter
IEC 61010-1, -2-030, CAT III 600V pollution level 2, CAT IV 300V pollution level 2
IEC 61010-031 (Requirements for Handheld Probes)
MODEL 7165A（CAT IV 600V）
MODEL 7264（CAT IV 600V）
MODEL 7265（CAT IV 600V）
When using KEW 3125A/3025A in combination with a test line, the lower of the two test types is generally used.
IEC 61326-1, -2-2 EMC standard
IEC 60529 IP40
EN50581 RoHS standard

Display: LCD Insulation Resistance Range: * 1200 Count VAC/DC Range: * 630 Count Bar Chart: * 36 Dot DAR/PI Value: * 9.99 Time: * 99.59
Low battery warning: Battery logo (4 levels)
Range display: display "OL" symbol (insulation resistance range) display "Hi" symbol (voltage range)
Automatic range: Move to higher range: 1000 counts Move to lower range: 80 counts (insulation impedance range only)
Automatic shutdown function: automatically shuts down after 10 minutes of operation (this function does not work during testing)
Environmental conditions for use: altitude below 2000m
Temperature and humidity guarantee range: 23 º C ± 5 º C/relative humidity below 85% (no condensation)
Operating temperature and humidity range: 0 º C~40 º C/relative humidity below 85% (no condensation)
Storage temperature and humidity range: -20 º C~+60 º C/relative humidity below 75% (no condensation)
Overload protection: Insulation resistance range: AC1200V/10 seconds. Voltage range: AC720V/10 seconds.
Voltage endurance: AC5160V (50/60Hz)/5s (between circuit and outer box)
Insulation impedance: ≥ 1000M Ω/DC 1000V (between circuit and outer box)
Size: 177 (L) × 226 (W) × 100 (D) mm
Weight: KEW3125A: 1.9kg (including battery), KEW3025A: 1.7kg (including battery)
Power supply: DC12V: alkaline battery size C (LR14) x 8 cells

range	insulation resistance
range	250V	500V	1000V	2500V	5000V(3125A)
Measurement range	0.0~100.0MΩ	0.0~99.9MΩ 80~1000MΩ	0.0~99.9MΩ 80~999MΩ 0.80~2.00GΩ 10.0~99.9GΩ	0.0~99.9MΩ 80~999MΩ 0.80~9.99GΩ 8.0~100GΩ	0.0~99.9MΩ 80~999MΩ 0.80~9.99GΩ 8.0~100GΩ 80~1000GΩ(1TΩ)
degree	±5%rdg±3dgt	±5%rdg±3dgt	±5%rdg±3dgt	±5%rdg±3dgt	±5%rdg±3dgt ±20%(100Gabove)
short-circuit current	About1.5mA
Rated determination electricity flow	0.5MΩWhen under load 1mA~1.2mA	1MΩWhen under load 1mA~1.2mA	2.5MΩWhen under load 1mA~1.2mA	5MΩWhen under load 1mA~1.2mA	---
open-circuit voltage	500VDC+30% 0within	1000VDC+20% 0within	2500VDC+20% 0within	5000VDC+20% 0within	---
voltage test	AC30-600V, DC30-600V, ±2%rdg±3dgt
Overall dimensions	177(L)×226(W)×100(D)mm
weight	about1.9kg (Contains battery)