JY-WWQS4 dry mist humidifier for textile workshop

NegotiableUpdate on 07/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1. Using air compressor gas to atomize water, resulting in fine water mist particles, fast evaporation, and high efficiency; 2. Adopting gas power and two-stage atomization system, no additional electric drive is required; 3. High quality dry mist particles (5-10um) that will not wet workshop equipment and products; 4. Air circuit delay design, first air jet and then spray, to effectively prevent nozzle blockage; 5. Configure humidity automatic control sensors to achieve automatic humidification based on the actual humidity of the air; 6. The installation is fast and convenient. As long as the air compressor is connected, the spray can work easily; 7. Maintenance free design, long service life, can always maintain a good spray state.

Product Details

JY-QS4 dry mist humidifier/air-water mixed spray humidifier series products are high-performance new mist humidifier and cooling spray devices developed and produced by Hangzhou Jiayou Industrial Co., Ltd.

Controllable pressure setting, controllable coverage range

Gas powered, two-stage atomization system;

High quality spray particles to avoid wetlands;

Air path delay design effectively prevents nozzle blockage;

Optional temperature and humidity automatic control sensors can be installed to achieve automatic humidification and cooling based on the actual temperature and humidity of the air;

The installation is fast and convenient. As long as the air compressor is connected, the spray can work easily;

Maintenance free design, long service life, can always maintain a good spray state.

pressure gauge

Controllable pressure setting: A single JY-QS4 air-water humidifier can achieve ideal humidification and cooling management of 100 square meters with a nozzle single-sided mist distance of 5-6 meters at a pressure of 3 bar.

Gas water dual channel design to prevent nozzle blockage

The mixed design of air and water routes solves the problem that the nozzle of the traditional spray process is easy to block.

High quality spray particles to avoid wetland

The spray particles are even, and the fine water mist can evaporate quickly to avoid the occurrence of wetland phenomenon.

Equipped with temperature and humidity sensors

Automatic temperature and humidity control system: The error is controlled within ± 3%, and the indoor temperature and humidity are always maintained at a suitable level.

工作原理

Industrial humidifiers have evolved from early water spraying, to later air conditioning humidification, and now to industrial humidifier humidification. Hangzhou Jiayou Industrial Co., Ltd. launched a new JY-WWQS4 dry fog humidifier/air-water mixed spray humidifier according to the current requirements of industrial production humidification.
The JY-WWQS4 dry mist humidifier/air-water humidifier has become a popular new humidification device due to its non wetting humidification performance, high energy-saving performance, high cost-effectiveness, and easy maintenance advantages.
It adopts the principle of siphon atomization system. The separated compressed gas and liquid converge at the special stainless steel nozzle to achieve two-stage atomization and obtain good spray effect. The diameter of spray particles is 5-10um.

系统组成安装效果

JY-WWQS4产品系统说明 JY-WWQS4安装示意图

water pressure （bar）	air pressure （bar）	discharge （L/h）	Gas consumption （L/min）	Unilateral spray distance （mm）	Shao Te average value （um）	Droplet reaching area （m²）
0	3	10	200	5800	5.5	120
0	2	8	180	4500	7.5	80
0	1	6	150	3800	10	60

specifications

material	main housing	polypropylene	Corrosion resistant and durable
	spray nozzle	316 stainless steel	Corrosion resistant and durable
	retainer	silicone rubber	─
weight	Single nozzle	220g	─
weight	4 nozzles	350g	─
Connection method	Gas path	Rc1/4	Diameter Φ 10mm
Connection method	waterway	Rc1/8	Diameter Φ 8mm