-
E-mail
76806818@qq.com
-
Phone
15068837752/15168257898
-
Address
587 Haitang Road, Economic Development Zone (Xinjie Town), Xiaoshan District, Hangzhou
Product Categories
Hangzhou Jiayou Industrial Co., Ltd
JY-WWQS1 Two Fluid Humidifier for Printing
NegotiableUpdate on 09/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1. Effectively eliminate static electricity. 2. Energy saving system. 3. The nozzle has a long service life. 4. Pneumatic needle valve with drip prevention function, no drip. 5. Spray humidification reduces dust, cools down and increases the content of negative oxygen ions in the air
Product Details
Good atomization, using vacuum valve design, compressed air negative pressure induction humidification, mist particle size is 5-10 μ m.
LCD display humidity controller, automatically controls environmental humidity and displays environmental humidity.
Equipped with mechanical automatic cleaning function, the user can set the cleaning time according to the water quality to avoid nozzle blockage and reduce maintenance.
It has a shutdown delay function, which can be set by the user to solve the problem of excessive water mist particles during shutdown.
Four fold protection and sequential function to prevent nozzle dripping or spraying water.
The consumption of compressed air is lower than that of similar products, and the operating cost is also lower.
Equipped with a standard humidity sensor for automatic humidity control.
Easy and fast installation, the spray direction can be adjusted at any angle.
The nozzle is made of stainless steel material, and various control valves are imported brands with excellent performance and long service life.
LCD (Liquid Crystal Display)
LCD display humidity controller, automatically controls environmental humidity and displays environmental humidity.
Pneumatic needle valve
The dynamic needle valve is imported from Germany and has the function of automatically removing scale and dust, preventing dripping, and the nozzle is not blocked.
Gas seal, water seal
The gas seal and water seal are imported from Germany, with good sealing effect, wear resistance and durability.
solenoid valve
Two position two-way solenoid valves imported from Germany, capable of withstanding pressures above 150Pa with minimal malfunctions.
pneumatic globe valve
Imported from Germany, the two position two-way pneumatic shut-off valve accurately matches the air pressure and water pressure to ensure excellent atomization.
humidity sensor
The humidity sensor imported from the United States is accurate, highly sensitive, has small errors, and has a low failure rate.
Large humidification capacity
The nozzle has a large humidification capacity and coverage area, with a single nozzle humidification capacity of 7kg/h and high atomization efficiency. Similar products consume less energy.
stainless steel material
The nozzle is made of stainless steel material, which is rust free and has a long service life.
Easy and fast installation
Easy and fast installation, the spray direction can be adjusted at any angle. The nozzle is maintenance free, unobstructed, drip free, and durable.
| This system JY-WWQS1 dry mist humidifier, also known as air-water mixing humidifier, consists of several air-water mixing nozzles, main controller, auxiliary controller, water and gas treatment, water and gas distribution, and other parts. Compressed air is sprayed from the nozzle through a pressure regulating valve, while pushing the pneumatic piston inside the nozzle to move the needle valve backwards, opening the water outlet. The sprayed compressed air creates a negative pressure (vacuum) in the water circuit and air-water mixing ratio control device connected to the nozzle, and pushes the valve stem in the ratio control device downwards, opening the water circuit. At the same time, the compressed air opens the pneumatic shut-off valve, and water flows through the proportional control device, reaches the nozzle, and mixes with the compressed air to form a water mist. |
 |
 |
model | JY-WWQS1 |
|
|
|
|
| Single nozzle humidification capacity | 7kg/h | |
|
|
|
|
| Air consumption of a single nozzle | 0.056m³/min | |
|
|
|
|
| Applicable area of a single nozzle | 80㎡ | |
|
|
|
|
| power frequency | 220V/50Hz | |
|
|
|
|
| air pressure | 0.7-1.0Mpa | |
|
|
|
|
| water supply pressure | 0.1-0.6Mpa | |
|
|
|
|
| Water quality | Drinking water or deionized water | |
|
|
|
|
| System humidification capacity | 49kg/h |
Similar Product Recommend
