-
Phone
1390965212918655266579
-
Address
Longzihu District, Bengbu City
Product Categories
Bengbu Longzihu District Jinli Sensor Factory
JLN-103 Hollow Torque Sensor
NegotiableUpdate on 08/24
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
JLN-103 Hollow Torque Sensor
Product Details
Overview:
The JLN-103 hollow torque sensor is specially designed to adapt to different installation scenarios. The power supply and measurement signals are transmitted in a non-contact manner, which is suitable for long-term use, low wear, and does not require any maintenance. For different applications, speed testing can also be added to the sensor.
technical indicators
|
indicator name
|
performance metrics
|
|
Measurement range
|
0～±5. ±10. ±20. ±50. ±100. ±200. ±500. ±1000 . ± 2000 ± 5000, etc
|
|
Power supply and output
|
± 15V DC ≥ 50mA output: frequency square wave 10 KHz ± 5KHz
24 V DC output: current signal 4~20mA, voltage signal 1~5VDC
|
|
Accuracy
|
±0.25 % F· S ， ±0.5 % F· S
|
|
Zero temperature drift
|
＜0.2 % F· S /10℃
|
|
Insulation impedance:
|
>500MΩ
|
|
Annual stability
|
0.3% F · S/year
|
|
ambient temperature
|
－20 ～ 60℃
|
|
Safe Overload
|
150 %
|
|
breaking load
|
200 %
|
|
relative humidity
|
0～90% RH
|
Technical features:
1. Small size, light weight, no base, easy to install and use;
2. No conversion required, directly output 4-20mA, 1-5V standard current and voltage signals, and directly form a torque measurement device with AD card, PLC or DCS;
3. It can measure both static torque and rotational torque;
4. High detection accuracy, good stability, and strong anti-interference ability;
5. Continuous measurement of static torque without the need for repeated zeroing;
6. Strong anti-interference ability, can be installed in any position and direction;
7. Suitable for high-speed and long-term operation;
8. Strain elastic materials have high strength and can withstand 150% load.
2. No conversion required, directly output 4-20mA, 1-5V standard current and voltage signals, and directly form a torque measurement device with AD card, PLC or DCS;
3. It can measure both static torque and rotational torque;
4. High detection accuracy, good stability, and strong anti-interference ability;
5. Continuous measurement of static torque without the need for repeated zeroing;
6. Strong anti-interference ability, can be installed in any position and direction;
7. Suitable for high-speed and long-term operation;
8. Strain elastic materials have high strength and can withstand 150% load.
Note: The length and shaft size of this sensor model are subject to material properties and customer requirements, and there is no fixed size. Please refer to the specific size at the time of ordering for details.
