JGHX-500/1500A track type steel based rigid sliding contact line

JGHX-500/1500A track type steel based rigid sliding contact lineThe product features of copper conductor assembled composite rigid body sliding contact line: reliable: using a fully flexible connecting rod structure collector, it can ensure reliable contact with the sliding contact line and will not cause power interruption faults. Convenience: This sliding contact wire is equipped with components for quick assembly on site. Adjustment and disassembly are extremely convenient. High strength: Made of rigid copper bars and high bending moment steel, it can be used in high temperature and dusty environments, and the conductor is not easily deformed. Large current carrying capacity: The current carrying capacity can reach 4000A, without the need for additional feeding circuit lines. It uses high-voltage insulators and can operate at voltages up to 3kV or even higher. Low voltage drop: Copper conductors and rare earth aluminum profiles are used, with low resistance and reduced pressure per unit length. Convenient and flexible layout: can be arranged horizontally, sideways, or suspended.

JGHX-500/1500A track type steel based rigid sliding contact lineThe rigid sliding contact line is generally supplied in a fixed length of 6m. The installation spacing of rigid sliding contact line insulation brackets is generally 3m. Sliding contact lines are divided into two types: single line type and double line equal feeding type. Except for the double line equal feeding type represented by JGH-II, the single line type is not separately marked.

Metallurgical cranes have a relatively higher working level than general cranes. The body material of metallurgical cranes is composed of calm steel, which can withstand the test of intense fire. The hooks and wire ropes are made of special materials that can withstand high temperatures. Metallurgical cranes are used in metallurgical environments where the temperature is generally high. If the electric hoist is exposed, it is easy to damage it. Therefore, in metal working environments, the electric hoist of the crane has a layer of high-temperature resistant protective equipment outside, which can disperse some of the temperature. In terms of quality requirements, most electric hoists installed on cranes are at or below the A5 level standard. Due to the limitations of the working environment, the electric hoist installed on metallurgical cranes has a higher safety level than A5, so the safety level is very high.