J21S series hydraulic press

NegotiableUpdate on 09/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

J21S series hydraulic press J21S series press is an open fixed table press with increased throat depth, which has a large working space and is widely used for stamping processing of large-sized sheet metal

Product Details

J21S series hydraulic press

J21SThe series press is an open fixed table press with increased throat depth, which has a large working space and is widely used for stamping large-sized sheet metal. Both use steel plate welded body, with high strength and rigidity.J21S-6.3~125AisJ21Evolved from the series of press machines, it adopts a rigid rotary key clutch, which is easy to operate and maintain. among whichJ21S-25A~125AAll are equipped with emergency braking devices that can make the slider stop abruptly0degree~135Within the range of degrees, it belongs to the safety type press. All series of presses are equipped with an automatic oil supply system.

Technical Specifications:

Specification Model	unit	J21S-250T	J21S-200T	J21S-160T	J21S-125T	J21S-100T
Nominal force	KN	2500	2000	1600	1250	1000
Slide stroke	mm	130	130	130	130	120
Number of trips	time/divide	30	35	40	40	40
Maximum mold height	mm	400	400	400	380	360
Maximum closed height adjustment amount	mm	110	110	110	100	90
Distance from the center of the slider to the body	mm	500	500	500	500	500
Workbench size(around×左右)	mm	840×390	760×1150	680×1100	690×960	600×900
Workbench hole size and diameter	mm	300	280	250	160	200
Distance between columns	mm	660	640	600	420	330
Mold handle hole size(diameter×depth)	mm	70×20	70×90	70×80	60×80	60×80
Thickness of worktable	mm	150	150	140	110	105
Maximum tilt angle of the aircraft body	°
Motor power	KW	22	22	15	11	7.5
Overall dimensions(long×wide×tall)	mm	2800×2400×3400	2600×2400×3400	2400×1430×3400	2060×1500×2900	2000×1500×2650

Specification Model	unit	J21S-80T	J21S-63T	J21S-40T	J21S-25T
Nominal force	KN	800	630	400	250
Slide stroke	mm	100	100	100	60
Number of trips	time/divide	45	45	50	60
Maximum mold height	mm	300	280	220	190
Maximum closed height adjustment amount	mm	80	75	75	50
Distance from the center of the slider to the body	mm	500	500	500	500
Workbench size(around×左右)	mm	480×750	450×700	400×600	350×480
Workbench hole size and diameter	mm	190	170	170	150
Distance between columns	mm	340	320	280	240
Mold handle hole size(diameter×depth)	mm	60×60	60×60	50×60	50×60
Thickness of worktable	mm	100	100	85	55
Maximum tilt angle of the aircraft body	°
Motor power	KW	7.5	5.5	4	2.2
Overall dimensions(long×wide×tall)	mm	1800×1300×2550	1700×1200×2420	1300×1100×2300	1160×800×2000