Italian OEG brake system

1、 Introduction to OEG Company in Italy

OEG SRL began constructing three-phase AC spring pressure safety brakes as originally planned in 1959. The high degree of innovation introduction made this series of brakes a standard in the following years and imitated by other manufacturers.

For several consecutive years, OEG SRL's revolutionary continuous flow brake series was used for specific purposes in wood processing and was quickly imitated; The innovation of this brake is the half wave rectifier winding, which can temporarily overexcitation the brake into a full wave, thereby doubling its performance.

At present, OEG srl produces various series of negative and positive electromagnetic brakes and has many D solutions. OEG SRL plans and produces electromagnets and selectors for the textile industry, as well as permanent magnets for lifting. OEG srl plan and production * customer needs,

IIItalian OEG brake systemdescription

The OEG safety brake is a spring pressure brake type. To supply power to the coil, the induction magnetic circuit attracts the spring system.

According to the application, the power circuit is turned on, and the spring releases the moving anchor, resulting in high-precision braking.

The choice of brake mainly depends on the moment of inertia to be braked, the number of interventions per hour, the working intensity, and the necessary idle time.

The brake type should be selected first based on the application type.

Due to the pressure spring, the OEG brake can operate in the event of a power outage. When the magnet housing (1) is energized, the moving anchor (2) is attracted and overcomes the spring force (7), allowing the shaft (13) with the brake disc (3) installed to freely rotate and slide axially on the gear hub (4). Turn off the power, and the spring (7) pushes the movable anchor (2) to slide on the guide rail (9), thereby pressing the brake disc (3) onto the motor flange (26). Therefore, the shaft (13) is braked. The structure with multiple springs and power-off braking devices ensures the intrinsic safety of the equipment.

attention

The performance of the brake and connecting equipment should be checked according to their application. Special consideration must be given to the following factors:

Braking torque, especially when there is a risk of overload;

Heat load;

The wear of friction fillers is related to maintenance intervals, especially when manual brakes are installed;

The ambient temperature for continuous work should not exceed 40 ° C and should not be lower than -5 ° C. If the temperature exceeds the range, please contact the manufacturer directly;

Special environmental conditions that require anti-corrosion protection and/or treatment.

Improper selection, installation errors, and lack of regular maintenance of brakes may lead to brake failure, causing damage to objects, personnel, and/or animals. Whenever a brake failure may cause damage to objects, personnel, and/or animals, additional protective measures should be activated in addition to the existing ones. If the consequences of such operations cannot be predicted, do not manually release the brake.

Italian OEG brake system

AC brake

MS/FM series

Normal input voltage of 230 V Δ 400 VY 50 Hz is used for direct power supply from the mains

The braking torque ranges from 5 Nm to 500 Nm.

S1 service, F-class insulation, IP55 protection (provided upon request) for assembly under motor protective cover

Non asbestos and noiseless friction filling material

Steel brake discs

High connection/disconnection speed

Compatible and interchangeable with DC FM series *

SMS series

Normal input voltage of 230 V Δ 400 VY 50 Hz is used for direct power supply from the mains

Braking torque from 10 Nm to 1000 Nm

S1 service, F-class insulation, IP55 protection (provided upon request) for assembly under motor protective cover

Steel brake discs

Non asbestos and noiseless friction filling material

High connection/disconnection speed

VMS series

Normal input voltage 230 V? 400 VY 50 Hz for direct power supply from the main power supply

Braking torque from 8 Nm to 400 Nm

S1 service, F-class insulation

Steel brake discs

Non asbestos and noiseless friction filling material

High connection/disconnection speed

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Our company's advantages

German GSR solenoid valve, German Samson SAMSON, German BURKERT Baode, German EUCHNER Ansneng, German Novotechnology, German SICK sensor, German HBM weighing sensor, German DI-SORIC, German HYDAC Hedec, German IFM Yifumen, German PILZ Pilz, German ZIMMER gripper, German Heidenhain HEIDENHAIN, German Diefenbach TIEFENBACH solenoid valve, German Kubler Kubler, German TR electronic Der, German Durag DURAG flame detection

American AI-TEK tachometer, American SEL microcomputer protection device/relay, American GF flowmeter/transmitter, American UE pressure switch, American SUN, American ASCO, American Wilkerson WILKERSON regulator, American Fairchild regulator, American MAC, American HPI high temperature strain gauges, American Nathan NASON switch, American Dublin Deublin connector, American METRIX, American Associated Research insulation tester

Agent: ELTRA, Italy

GEFRAN from Italy, PIZZATO from Italy, DATALOGIC chromatographic sensor from Italy, ATOS proportional valve/amplifier from Italy

Danish GRAS microphone, Swiss SWAN, Swiss CARLO GAVAZZI relay

Other imported brands can provide quotes