Intelligent softening breakdown tester

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The intelligent softening breakdown tester is applicable to GB/T4074.6/IEC 60851-6 standards, as well as NEMA and JIS standards in the United States and Japan. It is used to test the insulation performance of enameled round wires and thin film wrapped round wires with a nominal diameter of 0.020mm to 3.000mm and below after softening in a hot state.

Product Details

智能软化击穿试验仪

Intelligent softening breakdown testerProduct performance characteristics:

1. Implement GB/T4074.6/IEC 60851-6 standards and NEMA and JIS standards in the United States and Japan

2. Inspection standard: JB/T4279.8

3. Suitable for testing the insulation performance of enameled round wires and thin film wrapped round wires with a nominal diameter of 0.020mm to 3.000mm and below, after softening in a hot state

4. There are three testing methods: constant temperature method, temperature rise method 1, and temperature rise method 2

5. Automatic temperature measurement, control, adjustment, and display; According to the set preheating time, target temperature, and test time, the instrument automatically completes the preheating, heating, load application, and test voltage of the sample. When the test time is reached or the sample is broken down, the load is automatically unloaded and an alarm is triggered, and the test time and temperature are displayed. The entire testing process is automatically completed

6. Automatic forced air cooling fan enables rapid second test

7. The heating mold is made of brass material

Weights equipped:

Weight holder 0.25N × 1, 1N × 1

砝码0.15 N×1、0.25N×1、0.45N×1、1.2N×1、3.5N×1、4.5N×2、17N×1、34N×1、35N×1

Optional models:

RJ-20 softening breakdown tester

Intelligent softening breakdown testerMain technical parameters:

Heating mold size	100×100×70mm
Heating mold, intersection angle of two wire slots	90°
Test voltage between two samples	Constant temperature method and rising temperature method 1: AC100 ± 10V
Test voltage between two samples	Heating method 2: AC155V ± 15V
Sample breakdown action current	Fixed temperature method and rising temperature method 1:5 ± 0.5mA
Sample breakdown action current	Heating method 2:20 ± 10mA
Short circuit current between samples	＜50mA
Display temperature and temperature difference at the intersection of the sample	＜2℃
Sample preheating time, test time	1 second to 9999 seconds can be set arbitrarily
Max test temperature	≤500℃
Temperature setting for constant temperature method test	RT~500 ℃ can be set arbitrarily
Error of timing device for 120 seconds	±1s
input power	AC220V±10% 50Hz
heating power	900W
Overall dimensions	L×W×H 540×310×345mm
weight	32kg