Intelligent frequency conversion of biomass energy burner with high thermal energy and low loss

Intelligent frequency conversion of biomass energy burner with high thermal energy and low loss

As the main equipment of thermal equipment, biomass burners are designed, produced, and manufactured based on the performance and technical parameters of existing domestic industrial, commercial, and civilian boiler models. Through scientific theoretical calculations and years of practical experience, different thermal power series products are scientifically matched. Widely used in food processing, agricultural planting, industry, printing and dyeing, electroplating, spraying, baking paint, smelting, wood processing, drying, heating, heating, bathing, etc.

Intelligent frequency conversion of biomass energy burner with high thermal energy and low loss

1Using fuel Biomass new energy---Pure wood chips and shavings burn.

2High combustion efficiency Boiling semi gasification combustion combined with tangential swirl air distribution design enables the combustion engine to burn * and achieve combustion efficiency of up to90%The above.

3, Combustion *, Stability

The equipment operates under slight positive pressure without experiencing tempering or misfiring.

4Wide range of heat load regulation

The thermal load of the combustion engine can be at the rated load30%--120%Quick adjustment within the range, fast starting, and sensitive response.

5Variable frequency control

Adopting variable frequency feeding mode for both large and small fires, energy-saving *.

6Significant environmental benefits without pollution

By using renewable energy as raw material, sustainable utilization of energy has been achieved. Adopting low-temperature segmented combustion technology, in the flue gasNOXTheSO2Low emissions of dust and other pollutants. It is a substitute for kerosene stoves.

7No tar, wastewater or other waste discharge

By adopting high-temperature gas direct combustion technology, tar is directly burned in gaseous form, solving the technical problem of high tar content in biomass gasification and avoiding secondary pollution of water quality caused by washed tar.