Intelligent digital magnetic heating mixing pot

Welcome to our store. Wishing you a pleasant shopping experience!

Intelligent digital magnetic heating mixing pot ZNCL-GSΦ130×60mm /

190 * 90mm/240 × 150mm/Φ 310 × 150mm Features:

1. Using aluminum Teflon pot for heating, with a special heating method that can be used in water bath or oil bath.

2. The temperature control adopts fuzzy PID control algorithm, dual screen digital display, and self-tuning function,

Featuring high measurement accuracy, low temperature surge, single key touch operation, and internal and external thermocouple measurement

Temperature controlled, thyristor controlled output, 160-240V wide voltage power supply with break even protection

Protective function.

3. Heating and stirring can be performed on standard or non-standard reaction bottles with a volume of 50-5000ml.

4. Adopting the German PAPST series DC brushless motor, it has stable performance and low noise,

Long lifespan, no sparks generated.

5. The shell adopts a one-time flame retardant reinforced PBT injection molded shell, which is resistant to high temperatures and is resistant to fire

Corrosion and good insulation performance.

The 6.30 ° inclined control panel is suitable for both sitting and standing perspectives.

7. Infinite speed regulation, smooth at low speeds and strong at high speeds.

Intelligent digital magnetic heating mixing pot Usage

1. Fix the upright pole in the screw hole above the mixer and adjust the height of the cross clamp,

Fix the reaction bottle with a universal clamp, put in a suitable stirrer, and plug in the power supply~220 ∨,

Turn on the switch.

2. Adjust the "mixing" knob clockwise and adjust it to the appropriate position for mixing as needed.

When stirring large or viscous solutions, the knob can be adjusted appropriately to increase the stirring force.

4. Temperature setting: Press and hold the "▲" or "▼" keys to quickly set the temperature

Set the required heating temperature, such as 100 ℃. When the green light is on, it indicates heating, and when the green light is off, it indicates heating

Stop, the microcomputer will determine the heating based on the temperature difference between the set temperature and the current temperature

Measure and ensure that there is no temperature shock, and raise the temperature in one go, while maintaining a temperature difference of ± 1 ℃ between the set value and the displayed value

Balance the supply and cooling of heat, making the heating process easy to complete.

5. Self tuning function: Activating the self tuning function can adjust the temperature of different heating sections or heating power with respect to the solution

When the amount of liquid is irregular, the heating time is the shortest, the flushing temperature is the smallest, and the equilibrium is the best, but the change

The self-tuning of the heating medium or heating conditions should be reset.

6. Start self-tuning: Press and hold the shift key "?" for 5 seconds, and the setting window number will flash to enter self-tuning mode

In the setting state, after three temperature surges, the number stops flashing, indicating the end of self-tuning and can proceed

Can be used, but self-tuning needs to be used during initial heating, and the self-tuning done midway is not accurate.

7. There is a rubber plug underneath the mixer to protect the external thermocouple socket from corrosion

Rust and conductive wires are used. If removed, the internal probe will disconnect and the machine will stop working. If using external heat

When using a thermocouple, the plug should be removed and stored, and the external thermocouple plug should be inserted into the socket and locked tightly

Mother, then place the stainless steel probe into the solution for temperature controlled heating.

8. The appliance is equipped with a break protection function. When the thermocouple connection is poor, the display window will show

The green light "hhhh" goes out, and the appliance stops heating. It needs to be checked before use.

Precautions

1. Do not dry burn for use.

2. To ensure safe use, please ensure the grounding wire.

To extend the use of the product, all magnetic stirrer motors are equipped with fan cooling function,

When conducting heating experiments, especially at high temperatures, this instrument cannot be used solely for heating purposes,

Be sure to adjust the motor to a rotating or medium speed rotating state (or idle) to prevent the motor and electrical appliances from spinning

Damaged by high temperature radiation. If the motor cannot start and rotate, it should be promptly repaired by a dealer

Repair, otherwise failure to operate as required resulting in damage or loss will not be held responsible.

When the high-temperature heating is completed, please turn off the heating first and wait for a few minutes for the remaining temperature to dissipate before turning off the stirring.

5. The heating part has a high temperature, so be careful when working to avoid burns.

6. Electric leakage phenomena such as wet hands, liquid overflow, or long-term exposure to high humidity conditions,

It should be dried in a timely manner or naturally dried before use to avoid danger.

When not in use for a long time, please store it in a dry and non corrosive gas place.

When the environmental humidity is relatively high, there may be induced electricity transmitted through the insulation layer to the outer shell. Please

Ensure proper grounding to prevent electrical leakage, and pay attention to ventilation.

9. Relative humidity: 35% -85% (without condensation).

10. Insurance tube with a diameter of 5 × 20 15A.

If the content of this manual differs due to improvements made to the product or the product referred to in this manual,

No further notice will be given.

Technical parameters:

After-sales service

1. The product has a one-year warranty period, during which parts can be replaced free of charge (excluding non quality issues).

2. Lifetime maintenance of the product, replacing spare parts only requires paying the cost.

Note: Customized services can be provided according to customer requirements.