Intelligent Artificial Climate Box

Intelligent Artificial Climate BoxTechnical parameters:

1. Instrument name:intelligenceartificial climate chamber

2. Instrument model:MRC-450D-CO2-O2

3. Volume: ≥450L

4. Temperature control range:0-50 ℃ temperature control accuracy 0.1 ℃ fluctuation ± 0.5 ℃ - ± 1.0 ℃ non-uniformity ± 1.0 ℃

5. Humidity control range: 50-95% RH accuracy± 1% RH fluctuation ± 5% RH - ± 7% RH (national standard)

6. Illuminance:030000LX(0-410umol/m2.s)（As long as the required illuminance is input, the light source board will automatically adjust to the set illuminance, without the need for manual measurement with an illuminance meter）

7. Size (mm)）: Dimensions:7206701918mm，Inner container size:620*550*1280mm

8. Heating time: 0 ℃ to 40 ℃ ≤ 60 minutes

9. Cooling time: 40 ℃ to 10 ℃ ≤ 100 minutes

10. Working hours: continuous cycle

11. Working environment: 0-30 ℃, humidity below 85% RH, no corrosive gases

12. Compressor delay protection time: 3 minutes.

13. Working mode: Continuous operation (intermittent operation of compressor)

14. Noise: ≤ 70db

15. Power requirement: 220V/50Hz.

16. Air cooling technology, fluorine free refrigeration. The inner liner is made of 304 stainless steel, which is corrosion-resistant.

17. Polyurethane foam door design, with good insulation effect and small temperature fluctuations.There is a perspective window above the door130*500mm

18. The light source is warm white light with a color temperature of 4000K,+3000K

19. Imported chips with a service life of 50000 hours

20.Installation7 inchesTouch screen, can be programmed in multiple segments, and can be individually set for day and night mode temperature,Humidity,Lighting, time, cycle, etc.

21. Temperature control method: The back air duct inside the box is used for circulating cooling, with bottom in and top out, uniform circulation, and an air volume of 2m/s

22. Number of light sources: LED light source board waterproof and corrosion-resistant, made of aluminum substrate, with good heat dissipation effect, standard configuration3Layer light source,The area of each light source layer is400*400mm,

23. Light source ratio: The light source arrangement sequence is 20 * 22 rows, with a spacing of 2CM between them. The number of light sources is 440, including 3000K220 and 4000K220, with a ratio of 1:1The size is 300 * 600mm or 400 * 600mm.

24. Light source rack: Each layer of light source must be adjustable up and down to meet the process of plant growth from seedlings to flowering and fruiting. (At least 4 3D drawings of the equipment must be provided during bidding, otherwise the bid will be invalid)

25.Light source spectrum: Color parameters: Main wavelength583nm, Center of mass wavelength 574nm, color ratio R=21.8%, G=74.8%, B=3.3%, peak wavelength: 600nm; photometric parameters: luminous flux 12980lm, radiation flux: 56.077W, luminous efficiency: 01m/w, wavelength range: 380-800nm

26.The microcomputer program controls temperature, humidity, and light intensity, and can simulate temperature and humidity changes during day and night. It can also choose a sufficient and stable light source for growth environment.

30.Configurable30 segment programSet the time range of 1-99 hours for each segment, and different segmentation parameters can be set to meet different parameters of plant growth.

31.Brand compressors ensure long-term continuous operation of testing equipment, using environmentally friendly refrigerant (R134a), high efficiency, low energy consumption, and promoting energy conservation.(The compressor brand is imported Danfoss)

32.Adopting mirror stainless steel inner liner, with four corner semi-circular arc transition, the partition bracket can be freely installed and removed for easy cleaning inside the box.

33.Equipped with an independent temperature limit alarm system, it automatically interrupts when the temperature limit is exceeded, ensuring safe operation of the experiment and preventing accidents.

34.Can be equipped with RS485 interface and connected to a computer to synchronously monitor the experimental process or record experimental data through the computer.

35. SingleDoor: The door is openAt 80 degrees, it will automatically close. Install a swivel hinge to prevent poor sealing. Install a defogging system around the door frame to automatically defog and prevent water vapor leakage.

36.CO2: CO2 range 280-2000ppm, measured value 0-5000ppm, fluctuation value±50-100ppm. The probe adopts a far-infrared imported sensor, branded as GE from the United States. It comes with built-in regulating valves, flow valves, pressure reducing valves, solenoid valves, and other accessories.

37.:02 The measurement range is 0-100%, and the probe is made of British imported alumina, with a reading of 5 seconds.