Integrated vibration speed transmitter ZTYB40

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The integrated vibration speed transmitter ZTYB40 and ZT-YB40 integrate the vibration speed sensor and precision measurement circuit together to form a high-precision vibration measurement system ..

Product Details

Integrated vibration speed transmitter ZTYB40

The integrated vibration speed transmitter ZT-YB40 integrates vibration speed sensors and precision measurement circuits together to form a high-precision vibration measurement system, realizing the functions of the traditional "sensor+monitoring instrument mode vibration measurement system." This transmitter can be directly connected to DCS, PLC or other equipment, making it an ideal choice for vibration measurement of factory equipment such as fans, motors, water pumps, etc.

Technical Specifications
Power supply: 24VDC ± 10%
Input signal: taken from the signal of the built-in vibration speed sensor
Sensitivity: 20mv/mm/s ± 5%
Frequency response: 10-1000 Hz or 5-1000 Hz (special instructions)
Range: 0-20mm/s (true RMS)
0-200um (peak to peak)
Measurement error: ± 1% of full scale
Output current: 4-20mA
Output impedance: ≤ 500 Ω
Temperature range: -25 ℃ to+65 ℃ during operation
Storage time: -40 ℃~85 ℃
Relative humidity: up to 95%, non condensing
Dimensions: φ 33 × 75mm
Weight: Approximately 340g

Order code
XJ-9200A □□ (optional) - □□ (V/D) - A □□ - B □□ - C □□
Selection Guide
Optional: Waterproof connector □: F-Waterproof connector
Kaizhuang outgoing line □: B-Kaizhuang pipe
Required: Selection Description
Range □□:
Vibration velocity ranging from 10V-0 to 10mm/s; 20V*-0～20mm/s； 30V-0～30mm/s； ……
Vibration displacement ranging from 100D-0 to 100 μ m; 100D-0～200μm； 300D-0～300μm； ……
Installation direction A □:
1- Level; 2- Vertical; 3 * - Universal
Install thread B □:
1*-M10×1.5； 2-M8×1.25； 3- Magnetic seat; 4- Special customization
Cable length C □:
1-1m； 2*-2m； 3-3m； ……
Unless there are special circumstances, the manufacturer produces according to each item; If you have any special requirements, please consult with our company
Selection example: XJ-9200A-20V-A3-B1-C2
Integrated vibration speed transmitter ZT-YB40

What are the main applications of the UK SST oxygen transmitter sensor OXY-LC-485 series

The Continuous Emission Monitoring System (CEMS) for flue gas emissions is suitable for monitoring the continuous exhaust emissions of various boilers, and can monitor fixed pollution sources such as boilersindustryContinuous and real-time tracking tests are conducted on the concentration (mg/m3) and emission rate (kg/h, t/d, t/a) of particulate matter and gaseous pollutants in the flue gas emitted from furnaces, incinerators, etc.

By using direct extraction method, the concentration of particulate matter, sulfur dioxide (SO2), nitrogen oxides (NOX), oxygen (O2) content, flue gas temperature, flue gas pressure, flue gas flow rate can be continuously monitored online. It can also increase carbon monoxide (CO), carbon dioxide (CO2), hydrogen chloride (HCL), hydrogen fluoride (HF), ammonia (NH3), hydrocarbons (CHX), humidity, etcparameterThe measurement.

Due to the use of direct extraction method to measure the concentration of pollutants in flue gas, the system can calibrate the analyzer online with standard gas to ensure the accuracy of monitoring data. Gas analysis uses non dispersive methodsinfraredAbsorption method; The monitoring of oxygen content adopts the British SST threaded high-temperature zirconia oxygensensor(O2 sensor) - O2S-FR-T2-18C.

O2S-FR-T2-18C/B/A is a zirconia oxygen sensor with a sensitive element of zirconia. It uses two zirconia disks with a sealed space in between. One of the functions of the tray is a reversible oxygen pump, which sequentially fills the sample gas and evacuates this small space. Another disk is used to measure the oxygen partial pressure difference ratio and obtain the corresponding sensing voltage. When the zirconia disk operates as an oxygen pump, the required temperature of 700 ° C is generated by the heating element (the matching circuit board O2I-FLE-092 can provide heating and linearity)simulationQuantity output function. ）. The time it takes for an oxygen pump to reach the rated low and high pressure within a small space range corresponds to the oxygen partial pressure value in the environment.

Threaded high-temperature zirconia oxygen sensor (O2 sensor) O2S-FR-T2-18C/B/Aproductparameter

Threaded high-temperature zirconia oxygen sensor (O2 sensor) O2S-FR-T2-18C/B/A matching circuit board:

British SST zirconia oxygen sensor transmission board - O2I-Flex-092interfaceBoard givenelectronProvide necessary componentspower supplyThe SST dynamic oxygen sensor can be controlled by users to set ranges of 0-25% and 0-100%. The entire measurement range is linear. The factory default is 0-25%. When configuring the 0-100% range, customers can customize the analog output range to meet practical applications. The output can be configured as 4-20mA and 0-10VDCorRS232interface

UK SST OxygentransmitterThe sensor OXY-LC-485 circuit can provide SST series dynamic oxygen sensorspower supplyAnd control. The SST series oxygen transmitter does not directly measure oxygen concentration, but rather measures the partial pressure of oxygen in the gas. In order to directly output oxygen concentration, the oxygen transmitter IXY-LC-485 must be calibrated in air or in a gas with a known specific reference concentration. Application: Combustion control includes oil, gas, and biomass boilers; Composting; Laboratory and building air quality monitoring; Including personal safety in enclosed spaces.

Integrated vibration speed transmitter ZTYB40