Integrated control system

non-explosion-proofIntegrated control systemTechnical Requirements

1. Made by welding 1.5mm thick 304 stainless steel plate; Equipped with mounting plate, surface mirror brushed treatment;

2. Linear and angular dimensional tolerances without specified tolerances shall comply with GB/T 1804-m;

3. Welding without slag inclusion, virtual welding, or leakage, with a smooth and beautiful surface at the welding point;

4. The surface shall not be bumped or scratched, and internal and external grounding screws shall be installed;

5. Box mounted installation, with bottom inlet and bottom outlet, size: 310 * 250 * 180;

6. Quantity: 6 units;

7. Protection level: IP65 Anti corrosion level: WF2

non-explosion-proofIntegrated control systemfeature

Convenient for controlling the viscosity of materials during on-site production processes. At a certain temperature, the viscosity of materials changes with temperature. The control system can collect data and build a programmable controller based on the viscosity, or connect to the DCS system to control the addition or subtraction of materials on site.

Technical Specifications

Power supply: 220VAC output: dual channel 4-20mA, 7-inch LCD screen, displaying dynamic viscosity, kinematic viscosity, temperature, and density. At the same time, it is possible to calibrate the viscosity at 24 points on the screen, adjust the duty cycle, and control the device to set parameters at different viscosity limits. Explosion proof control box.
Main parameter display

Main parameter display

This interface is the main interface that displays all parameters.