Insulated boots and gloves voltage tester

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The main features of the insulated boots and gloves voltage tester are: fully automatic voltage boosting: the tester can automatically boost the voltage to the required test voltage and maintain it for testing. Multi channel testing: Multiple insulated boots or gloves can be tested simultaneously, usually up to 6, to improve testing efficiency. Leakage current measurement: The tester can measure the leakage current of each sample to help determine the insulation performance. Intelligent judgment: capable of automatically identifying non-conforming samples and displaying test results.

Product Details

Insulated boots and gloves voltage tester is an electrical equipment used to test the voltage resistance performance of insulated boots and gloves. It mainly consists of two parts: a sink and a control console. The sink is divided into upper and lower areas, with the upper area consisting of six small sinks that can withstand voltage tests with six insulated boots or gloves at once; The lower area is the test transformer, providing necessary high-voltage power supply.

The instrument adopts a fully automatic voltage rise (fall) method, which can automatically read the leakage current of each test sample and achieve automated operation throughout the entire testing process, including automatic printing of test data, effectively solving the irregular testing methods in the past, simplifying testing procedures, and improving testing speed. At the same time, it also has functions such as overcurrent protection and overvoltage protection, ensuring the safety and reliability of the testing process.

When using insulated boots (gloves) voltage tester, operators need to follow certain steps and precautions. Firstly, it should be ensured that the power frequency withstand voltage test bench must be reliably grounded, with a grounding resistance not exceeding 0.1 Ω, to ensure operational safety. Secondly, before testing, the insulated boots (gloves) should be inspected to ensure that there are no damages, moisture, or other phenomena. Then, place the insulated boots (gloves) in the sink and add enough water to cover the test sample. Next, set test parameters such as voltage, time, etc. through the console and start the test. During the testing process, the instrument will automatically perform operations such as boosting, timing, and lowering, and display test data in real-time. Finally, determine whether the insulated boots (gloves) meet the requirements based on the test results.

Insulated boots and gloves voltage testerKey Features:

Fully automatic voltage boosting: The tester can automatically boost the voltage to the required test voltage and maintain it for testing.

Multi channel testing: Multiple insulated boots or gloves can be tested simultaneously, usually up to 6, to improve testing efficiency.

Leakage current measurement: The tester can measure the leakage current of each sample to help determine the insulation performance.

Intelligent judgment: capable of automatically identifying non-conforming samples and displaying test results.

Convenient to move: The bottom is equipped with casters, making it easy to move and operate.

Safety protection: Equipped with overcurrent and overvoltage protection functions to ensure the safety of operators and equipment.

Working Principle:

Power on: Connect the tester to a 220V power supply and ground it.

Set parameters: Set parameters such as test time, voltage, and current through the panel.

Start testing: Start the tester, adjust the voltage regulator to increase the pressure, and observe the instrument conditions of the control box and water tank box.

Record data: During the testing process, record the leakage current and voltage values of each sample.

End of Test: After the test is completed, the voltage will be automatically reduced and the power will be turned off, displaying the test results.

Precautions for use:

Safe distance: Operators should operate within a safe distance to avoid high-voltage electric shock.

Reliable grounding: Ensure that the tester is reliably grounded with a grounding resistance of less than 0.1 Ω.

Check electrical components: Before use, check whether the contacts of each electrical component are loose and whether the contact is good.

Cleaning and maintenance: Before and after use, all parts should be cleaned and stored in a dry and ventilated place.

Overall, the insulation boot (glove) withstand voltage tester is an efficient, accurate, safe, and reliable testing equipment widely used in industries such as power and electrical to test the performance of insulation boots and gloves. By using this device, the safety of workers can be effectively ensured and safety accidents caused by unqualified insulation tools can be avoided.

ZY2677Insulated boots, insulated gloves, voltage testerOur company has designed and produced insulation boots in accordance with the requirements of the "Preventive Testing Regulations for Power Safety Tools and Instruments" issued by the State Power Corporation, and continuously improved them based on feedback from users

Special equipment for batch testing of gloves. This product effectively solves the problem of non-standard testing in the past, improves work efficiency, and ensures work safety. It is an ideal device for insulation boots (gloves) withstand voltage testing.

technical parameters

1. Power supply voltage 220V 50HZ

2. Rated power 0.5KVA

3. Rated output voltage 30KV

4. Leakage current display, equipped with overcurrent protection, zero position, timing, fault light and other functions.

5. Remote boost!