Instrument insulation box, protective box

Main component materials:Box made of fiberglass, stainless steel, and iron; The instrument bracket is surface treated with A3 steel; Sealing tape and connecting tape are made of foam rubber; The hinge buckle is made of stainless steel.

Main structural features: The upper and lower boxes are inclined and connected by hinges. The closure is equipped with a buckle for easy opening and closing. When opening the box, as long as there is no buckle, the upper box can be raised 90 degrees upwards. The box is equipped with a support rod to support the box cover for installation and maintenance work.

The instrument holder is equipped with two intersecting tracks for the installation of instruments inside the box, allowing them to move freely in the front, back, left, and right directions, so that the instruments can be fixed in the desired optimal position. Finally, tighten the locking screws on the bracket track.

There are a total of 6 holes in the lower box for passing through a diameter of 14 × 2 steel pipe, with four holes on the bottom and two holes on the back. There are two spare holes for easy installation according to the installation position of the on-site instrument tube. The unused holes are sealed with plugs.

YXH-B type instrument protection box structure

Main component materials:Box made of fiberglass, stainless steel, and iron; The instrument bracket is made of A3 steel with surface electroplating or thermal spraying treatment; Sealing tape and connecting tape are made of foam rubber; The buckle is made of stainless steel.

Main structural features: The box body and lid are both inclined and open type, with a front opening door that does not require hinges or braces. Instead, alloy angle steel is used to cover the box body. The upper cover can be removed during on-site instrument installation, and the front opening door is for easy adjustment and maintenance after instrument installation. The door is equipped with a beautiful handle for daily observation of instruments.

YXH-C type instrument protection box structure

Main component materials: box body made of fiberglass, stainless steel, and iron; The instrument installation panel and C-shaped channel steel are galvanized on the surface of A3 steel; The sealing tape and connecting glue are made of foam rubber, and the buckle is made of stainless steel.

Main structural features: The box body and box cover are detachable, with fixed pillars connected to the box body from the back. The front of the box cover is open, and there is an instrument mounting plate and a combination of T-shaped bolts and C-shaped channel steel inside the box. The mounting plate is connected to the C-shaped channel steel by T-shaped bolts and can move up and down, making it easy to select the position. After installation, the T-shaped bolt cap can be locked, and the box cover and box body can be removed. After the instrument is installed, the box cover and box body can be fitted together and connected with a buckle; Opening the door is for regular debugging, maintenance, and observation of instruments.

YXH-D type instrument protection box structure

Main component materials: box body made of fiberglass, stainless steel, and iron; The instrument bracket is made of A3 steel with galvanized surface; Sealing tape and connecting tape are made of foam rubber; The buckle is made of stainless steel.

Main structural features: The box body and box cover adopt a sleeve type design, and the box body is a seat type fixed column connected by the bottom or can be connected by the back. The box body is equipped with 4-6 buckles for locking the box cover and box body after being fitted together. When installing instruments on site, the box cover can also be removed, and there is an observation window on the box cover for instrument observation.

YXH-E type instrument protection box structure

Main parts materials: the box material is B3 steel surface electrostatic spraying treatment, the buckle is stainless steel, and the sealing rubber is foam rubber; The door bolt is chrome plated on the A3 surface.

Main structural features: The box body is mainly composed of three major parts: the base, the box frame, and the door. The instrument pillars inside the box are directly welded to the base, and the front door is opened for instrument installation. The door is equipped with a handle for great convenience.

The main components of YXH-F and C-type instrument protection insulation boxes are made of B3 steel and treated with electrostatic spraying. The instrument pillars inside the box are installed on channel steel, and their positions can be adjusted freely. In addition, F-type instrument protection (temperature) boxes have two types of front and rear doors, making installation and use extremely convenient.

The standard external dimensions are: 500 * 400 * 400 600*500*400600*500*500600*600*500800*500*600800*600*6001000*500*6001000*600*6001200*600*6001200*800*6001400*600*500