Installation and maintenance of BURKERT universal solenoid valve

NegotiableUpdate on 05/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Installation and maintenance of BURKERT universal solenoid valve: When powered on, the solenoid coil generates electromagnetic force to lift the closing member from the valve seat and open the valve; When the power is cut off, the electromagnetic force disappears, and the spring presses the closing member against the valve seat, causing the valve to close. Characteristics: It can work normally under vacuum, negative pressure, and zero pressure, but the diameter generally does not exceed 25mm.

Product Details

Installation and maintenance of BURKERT universal solenoid valve

The solenoid valve has a sealed chamber with through holes at different positions, each connected to a different oil pipe. The middle of the chamber is a piston, and there are two electromagnets on both sides. The valve body will be attracted to which side when the magnet coil on the other side is energized. By controlling the movement of the valve body, different oil discharge holes can be opened or closed. The oil inlet hole is normally open, and hydraulic oil will enter different oil discharge pipes. Then, the pressure of the oil will push the piston of the oil cylinder, which in turn drives the piston rod, which drives the mechanical device. In this way, the mechanical motion is controlled by controlling the current on and off of the electromagnet.

Universal solenoid valves support on-site installation and have a short response time. The valve body adopts hot forging process.

A valve is a servo controlled diaphragm valve. Valve operation always requires a minimum pressure difference. According to the application situation, there are different diaphragm materials and modes of action to choose from. The standard brass valve body meets European drinking water requirements. Provide anti zinc brass for other markets. The shell has added a stainless steel version. To reduce power consumption during operation, a coil with dual coil technology and integrated "Kick and Drop" electronic components can be used. Manual operating components are included in the valve supply scope to achieve simplified maintenance and debugging.

Using specific sealing materials, it has a longer service life. CNC machining helps ensure the accuracy of solenoid valves.

Load cycle continuous operation 100% ED switching time 1.) Open: 0.1-1.5 seconds

The solenoid valve is equipped with a sealed chamber inside, with through holes connected to different oil pipes at different positions. The middle of the chamber is a piston, and the two sides are electromagnets. The valve body is moved by controlling the current of the electromagnet to open or close the oil discharge hole. The valve body structure can be divided into three categories: direct acting, distributed direct acting, and pilot operated, including six branch types: direct acting diaphragm structure, step-by-step direct acting piston structure, etc.

Using plastic sealed coils, this design helps prevent moisture. Liquids, gases, and oils can be mixed and passed through, expanding the applicability of the valve.

This valve has a status judgment function. Adopting a specific structural design, the operating state is relatively stable. The piston structure helps with sealing, and its coil design reduces the risk of burning out

Installation and maintenance of BURKERT universal solenoid valve