Industrial explosion-proof blower

NegotiableUpdate on 05/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Working principle of industrial explosion-proof blower: Explosion proof vortex air pump is a dual-purpose vortex air pump for blowing and suction. The special blade design of high-pressure fan has the characteristics of high pressure, large air volume, low noise, and high temperature resistance. The high-pressure fan has strong insulation performance, easy installation, high stability, oil-free and dry gas passing through, and high quality. The generation of high pressure and high suction is due to the design of the impeller.

Product Details

Industrial explosion-proof blower

Explosion proof area notice: Explosive substances: Many production sites can produce certain flammable substances. About two-thirds of the underground coal mines contain explosive substances; In the chemical industry, over 80% of production workshop areas contain explosive substances. Oxygen: Oxygen in the air is ubiquitous. Ignition source: Electrical instruments are widely used in the production process, and various frictional sparks, mechanical wear sparks, electrostatic sparks, high temperatures, etc. are inevitable, especially when instruments and electrical components fail. Objectively, many industrial sites meet the conditions for explosion. When the concentration of explosive substances mixed with oxygen is within the explosive limit range, if there is an explosive source, an explosion will occur. Therefore, it is necessary to adopt explosion-proof measures.

Specification of vacuum explosion-proof high-pressure and medium pressure fans:
Power: 0.18 KW、0.4KW、0.75KW、1.5KW、2.2KW、3KW、4KW、5.5KW、7.5KW、11KW、15KW、18.5KW、20KW、22KW、25KW、30KW、37KW； Wind pressure: 50mbar-650mbar; Airflow: 40 cubic meters per hour -1134 cubic meters per hour. For the convenience of selecting different specifications, both single-stage and two-stage models are available in stock; Frequency: 50Hz, 60Hz; Voltage: 110V-615V, universal voltage, suitable for use in all countries. If special voltage is required, it can be customized according to requirements.

Features:

1. It has dual functions of blowing and suction, and can be used for both suction and blowing;

2. Running with little or no oil, the output air is clean;

3. Compared to centrifugal fans and medium pressure fans, their pressure is much higher, often more than ten times that of centrifugal fans;

4. If the pump body is die cast as a whole and shockproof mounting feet are used, the requirements for the installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles;

5. Compared to similar fans, its operating noise is lower, and a low-noise high-pressure fan is introduced:

6. Maintenance free use; Its consumable parts are only two bearings, which basically do not require maintenance within the warranty period;