Incubator H

Product Parameters:

1. Temperature range for turning off lights: 0 ℃~+60 ℃; Light on temperature range: 10 ℃~+45 ℃; Temperature fluctuation: ± 0.3 ℃; Temperature uniformity: ± 0.5 ℃; Temperature control accuracy: ± 0.1 ℃.

2. One layer of solar LED light panel, each LED size 40x60cm ± 1cm, with 280 light beads containing waterproof lens settings. The light beads are designed with optical simulation, and are arranged in a proportional scaling manner from the center point of the light panel to the periphery to improve the uniformity of illumination at various points under the light panel. The maximum power of each light panel can reach 90W, and the intensity of the LED light panel can reach 400 μ mol m-2 s-1.

3. Configure a mobile workbench with UV sterilization function, and include an approximate UV cultivation light source and a black light source.

4. Temperature sensor for temperature control system: PT-100 Ω, microcomputer PID, touch screen, Chinese and English operation interface, with alarm recording and high/low value alarm (temperature).

5.50 sets of programs can be freely set and output saved. Each set of programs contains 24 segments that can be set. Temperature and lighting can be independently controlled to simulate environmental conditions, and can be selected in a stepped or linear slope mode. Setting the initial value and target value at two points can calculate the slope function and simulate environmental gradient conditions.

6. Safety device: Over temperature alarm and protection device, overload current protection, fault elimination message displayed on HMI, capable of recording more than 8000 data records, historical information and alarm records can be read out through USB flash drive, and compared with perpetual calendar time.

7. Cooling system: The self cooling air-cooled condensing unit is equipped with a hot gas bypass system, no CFC refrigerant, and forced air horizontal circulation to ensure optimized uniformity in each layer.

8. Internal dimensions: W550 * D500 * H1300mm.

9. External dimensions: W650 * D850 * H1950mm.

10. Box structure: The internal volume is not less than 370 liters (practical and effective space, excluding indoor units and air ducts), with observation windows and shading panels, adjustable growth height of 2.5cm (every 2.5cm interval), magnetic strips on the box door, casters, and adjustable level. External steel plate electrostatic powder baking paint, vertical pattern treatment can reach a thickness of over 50 μ m, beautiful and easy to clean, insulation: PUF polyurethane insulation material 6cm. The door panel contains non condensing ornamental glass window with shading cover plate, door magnetic washer, and lockable door buckle.

11. Power and safety: 220V, 50Hz power supply; The main power supply control module of the equipment must have safety certification specifications and comply with third-party testing and certification. Equipped with over temperature alarm and protection device, with compressor over temperature, over-voltage, over-current protection, compressor delayed start protection, and fault elimination message displayed.

12. When bidding, it is necessary to provide a report on the measurement of light quality at 15cm under each layer of illumination when the on-site testing light source is fully turned on, including illuminance (Lux), PPFD (μ mol m-2 s-1), spectral proportional intensity map, and the measured intensity at each point wavelength (distance of every 1nm) μ mol m-2 s-1. The measurement range is above 350-800nm, and the spectrometer provides a calibration report within three years.

13. Equipped with power lock and door lock.

Accessories:

1. a manual

2. A spectral detection report

3. Three layer stainless steel mesh frame

4. One set of drainage pipeline

5. sunlightLEDOne piece of light plate