Imported triple piece MSE6-E2M-5000-FB13-AGD type

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Imported three piece MSE6-E2M-5000-FB13-AGD model, FESTO three piece in stock Shanghai hot selling fake one penalty of ten $r $n In the pneumatic transmission system, the pneumatic three piece refers to the air filter, pressure reducing valve, and oil mist device. Some brands of solenoid valves and cylinders can achieve oil-free lubrication (lubrication function is achieved by lubricating grease), so there is no need to use an oil mist device! The combination of an air filter and a pressure reducing valve can be called a pneumatic two-piece. The air filter and pressure reducing valve can also be combined together to form a filter pressure reducing valve (with the same function as using an air filter and pressure reducing valve in combination).

Product Details

Imported triple piece MSE6-E2M-5000-FB13-AGD type, FESTO three piece spot, Shanghai spot hot selling, fake, one penalty of ten

In the pneumatic transmission system, the pneumatic triple component refers to the air filter, pressure reducing valve, and oil mist device. Some brands of solenoid valves and cylinders can achieve oil-free lubrication (relying on grease to achieve lubrication function), so there is no need to use an oil mist device! The combination of an air filter and a pressure reducing valve can be called a pneumatic two-piece. The air filter and pressure reducing valve can also be combined together to form a filter pressure reducing valve (with the same function as using an air filter and pressure reducing valve in combination). In some situations, it is not allowed to have oil mist in compressed air, so an oil mist separator is needed to filter out the oil mist in the compressed air. In short, these components can be selected as needed and combined for use. The pressure reducing valve can stabilize the gas source, keeping it in a constant state and reducing damage to hardware such as valves or actuators caused by sudden changes in gas pressure. Filters are used for cleaning the gas source and can filter out moisture from compressed air to prevent moisture from entering the device with the gas. The oil mist lubricator can lubricate the moving parts of the machine body and lubricate the parts that are not convenient to add lubricating oil, greatly extending the service life of the machine body.Imported triple piece MSE6-E2M-5000-FB13-AGD type

Technical Specifications:

Size	6
Series	MSE
Assembly position	Horizontal+/-5 °
Valve function	2/2 normally open, single electronic control
Work pressure	4 . .. 10 bar
Working medium	Compressed air complies with ISO8573-1:2010 [7:4:4]
Explanation on Work and Lead Medium	Lubricated compressed air cannot be used
CE symbol (see applicable standards)	According to the EU-EMV guidelines
Corrosion resistance grade CRC	2- Moderate corrosion impact
Storage temperature	-10 . .. 60 °C
Medium temperature	0 . .. 50 °C
Protection level	IP65 Plug socket
Environmental temperature	0 . .. 50 °C
Authorization	RCM Mark
Product weight	3,300 g
Pneumatic connection, air port 1	G1/2
Pneumatic connection, air port 2	G1/2
Material information, sealing	NBR
Material information, shell	die-cast aluminum
Material information, lid	PA - Strengthen
Material information, cover	PA - Strengthen
Fieldbus interface	Sub-D socket, 9-pin
Working voltage range, DC electronic components/sensors	18 . .. 30 V
DC working voltage, load voltage	18 . .. 26.4 V
Polarity fault-tolerant protection	Used for working power interface
Units that can be displayed	KPa l l/min m3 mbar psi scf scfm
Flow measurement range of initial value	50 l/min
The flow measurement range of the final value of zui	5,000 l/min
Flow accuracy	+/- (3% o.m.v. + 0,3% FS)
Pressure measurement range, initial value	0 bar
Pressure measurement range, final value	14 bar
Accuracy, FS	3 %FS