Imported online phenolphthalein alkalinity analyzer

NegotiableUpdate on 01/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The FESKS/FESKO imported FOSTCO 5000 P imported online phenolphthalein alkalinity analyzer is an online analyzer that automatically determines water quality parameters based on colorimetric titration. By adding reagents to the water sample, a color reversal reaction will occur. Based on the indicator used, the device evaluates the intensity of the color. Calculate the concentration of phenolphthalein alkalinity in water by observing the color change of the sample during reagent addition. $r $n is applied to industrial and boiler water, groundwater, and other natural water.

Product Details

FESKS/Fisker imports FOSTCO 5000 P from the UKImported online phenolphthalein alkalinity analyzerIt is an online analyzer that automatically determines water quality parameters based on colorimetric titration. Adding reagents to water samples can cause color reversal
Should. Based on the indicator used, the device evaluates the intensity of the color. Calculate the concentration of phenolphthalein alkalinity in water by observing the color change of the sample during reagent addition.

Application: Industrial and boiler water, groundwater, and other natural water.

Application: Industrial and boiler water, groundwater, and other natural water.

Product Features:

→ Reliable, accurate, and fully automatic analyzer

→ Monitor two programmable limit values

→ Perform simple debugging through the configuration wizard

→ Automatic calibration, automatic diagnosis, and automatic measurement

Compact design, easy to maintain and clean

Multi language, multi-color LED display

Relay output of error message

→ Analog output 0/4-20 mA, digital output RS 485

→ Digital input for initiating analysis, flow switch, or interval reset

Measurement data storage and measurement data protocol on SD card

Update software through SD card

FESKS/FOSTCO 5000 P imported from the UKOnline phenolphthalein alkalinity analyzerThere are two versions:

Wall mounted analyzer

The analyzer consists of a controller and a measurement chamber. Both are installed on a bracket on the same wall. This version is fully functional, including connections for inlet and outlet, as well as a bracket for holding reagent bottles.

Shell analyzer

For wall mounted analyzers, there is a plastic casing that can be used to use the analyzer in locations where pollution is expected to be more severe. The analyzer on the wall mount can be quickly installed in the housing with 4 screws. If the analyzer is ordered together with the casing, the device is already installed in the casing.

进口在线酚酞碱度分析仪

Technical Specifications

parameter	value/scope
measurement method	Titration colorimetric method(Titration of color change
measurement range	0.2-5 mmol/L、0.8-20 mmol/L
measurement accuracy	The ± value is 5% of the maximum reading of the reagents used separately
Repetitive accuracy	The ± value is 2.5% of the maximum reading of the reagent used
Reagent consumption	approximately0.05-0.6ml/Analysis depends on the measured concentration of phenolphthalein alkalinity in the water quality
analysis cycle	Continuous measurement interval measurement(5-360min)/external control
Measurement duration	approximately3min,Based on the alkalinity of phenolphthalein in water quality and the set flushing time
Analysis frequency	500Milliliter reagent softened water can perform 10000 analyses
water consumption	about 1 L/ 2 barBelow analysis,The water consumption varies according to the inlet pressure and the set flushing time
relay output	4Road relay, maximum load 250V 4A (alarm, pre alarm, fault, missing indication, analysis contact)
signal input	2One input, maximum load 18V 12mA, stop or start analysis
analog output	0-20mA/4-20 mAResolution:<100 μ A, max.750 Ω
digital output	RS 485 Modbus RTUagreement
power supply voltage	100-240 VAC(50/60 Hz),24V AC/DCoptional
power consumption	25W(Running), 8 W measuring, 3.5W (standby)
load capacity	terminal1The load capacity of a relay with an internal current of 1A up to 4. The load capacity of an external power supply is 2.5 A
size/weight	No shell:274x275x129mm(WxHxD)About 2kg with shell: 332x345x190mm (WxHxD) about 4kg
Storage temperature	0°C-45℃
ambient temperature	10°C-45 ℃
Measure water temperature	5°C-40℃
Protection level	Wall opening installationIP43,Installed in the box IP56

Water quality requirements: General water inlet: pressure min: 0.5 bar - max: 5 bar/recommended 1-2 bar, transparent, no solids, no bubbles, no odor

Water quality requirements for measuring phenolphthalein alkalinity in water: pH:<8.2

FOSTCO 5000 P online phenolphthalein alkalinity analyzer ordering information

Order number and model description

60-5000-30 Fostco 5000 P online phenolphthalein alkalinity analyzer

200920/200921 P720/P730 supporting reagents: 0.2-5 mmol/l (500ml), 0.8-20 mmol/l (500ml)