ISWR horizontal single-stage single suction hot water pump

1、 Product Overview:

The ISWR horizontal single-stage single suction hot water pump is a suitable hot water pump based on the ISW type. This series of pumps has excellent performance, high reliability, long service life, reasonable structure, and beautiful appearance.

2、 Purpose:

The ISWR horizontal single-stage single heat absorption water pump is suitable for high-temperature hot water pressurized circulation and transportation in metallurgy, chemical industry, textile, wood processing, papermaking, as well as boilers, bathrooms, hotels and other industries, and for urban housing heating circulation. The operating temperature is below 105 ℃.

3、 Working conditions:

1. Suction pressure ≤ 1.6MPa, or high working pressure of the pump system

≤1.6MPa， The pump suction pressure+pump head is ≤ 1.6MPa, and the pump static pressure test pressure is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should

Please specify separately during ordering, so that the overcurrent and connecting parts of the hot water pump can be made of cast steel during manufacturing.

2. Environmental temperature<><>

3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than or equal to

4、 Product features:

Smooth operation: The concentricity of the pump shaft and excellent dynamic and static balance of the impeller ensure smooth operation without vibration.

Drip proof: Hard alloy seals made of different materials ensure that there is no leakage during the transportation of different media.

Low noise: The water pump supported by two low-noise bearings runs smoothly, with almost no noise except for weak motor noise.

Low failure rate: The structure is simple and reasonable, and the key parts are matched, greatly improving the fault free working time of the whole machine.