ISWB horizontal single-stage single suction explosion-proof oil pump

1、 Product Overview

ISWB horizontal single-stage single suction explosion-proof oil pump is a suitable oil pump based on ISW. This series of pumps has excellent performance, high reliability, long service life, reasonable structure, and beautiful appearance.

2、 Purpose:

ISWB horizontal single-stage single suction explosion-proof oil pump is used to transport petroleum products such as gasoline, kerosene, diesel, etc. The temperature of the transported medium is -20 ℃ to+105 ℃.

3、 Working conditions:

1. Suction pressure ≤ 1.6MPa, or high working pressure of the pump system

≤1.6MPa， The pump suction pressure+pump head is ≤ 1.6MPa, and the pump static pressure test pressure is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should

Please specify separately during ordering, so that the overcurrent and connection parts of the pump can be made of cast steel during manufacturing.

2. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than or equal to

Note: If the medium used is with small particles, please indicate it when ordering so that the manufacturer can use wear-resistant mechanical seals.

4、 Product features:

Smooth operation: The concentricity of the pump shaft and excellent dynamic and static balance of the impeller ensure smooth operation without vibration.

Drip proof: Hard alloy seals made of different materials ensure that there is no leakage during the transportation of different media.

Low noise: The water pump supported by two low-noise bearings runs smoothly, with almost no noise except for weak motor noise.

Low failure rate: The structure is simple and reasonable, and the key parts are matched, greatly improving the fault free working time of the whole machine.

Easy maintenance: Replacing seals and bearings is simple and convenient.