ISO3308 standard automatic rotary cigarette smoke generator

ISO3308 standard automatic rotary cigarette smoke generator

It is a highly automated cigarette smoke generator, which completes all steps from dispensing cigarettes from the cigarette box, loading cigarettes, lighting cigarettes, and finally removing cigarette butts through system automation. You only need to put the cigarette into the cigarette holder, set up the program, and start the entire experiment process.

The system is equipped with a high-precision and fast motion electric device, with precise and fast movements, which can truly achieve long-term continuous smoking without manual intervention. It is an ideal choice for high flux, high concentration of smoke, and long-lasting continuous operation of cigarettes.

It can be used for research on the impact of mainstream tobacco smoke (or sidestream smoke) on human health, such as exposure of cell gas-liquid interface, preparation of small animal models of chronic obstructive pulmonary disease (COPD) and bronchitis, and physical and chemical analysis of cigarette smoke. It is particularly widely used in high-throughput unmanned animal COPD modeling systems.

Highly automated, the entire smoking process does not require manual supervision, and the system can easily handle any number of cigarettes;

High precision operation, all actions including loading, rotating, smoking, and removing cigarette butts are highly accurate without the need for sensors;

Shorter path, the path of smoke from leaving the filter to the smoke outlet is shorter and more reasonable, greatly reducing transportation losses;

■ Freely programmable, the system is controlled by software, and can choose to run according to international standards or edit parameters arbitrarily;

■ Safe and easy to clean: All smoke pathways are made of corrosion-resistant materials, which not only avoid adsorption but also facilitate cleaning;

Compliant with both ISO 3308:2012 and CIR standards, and also offers user selectable settings modes;

■Compliant with FDA 21 CFR PART 11 regulatory requirements;

■ More special requirements can be customized according to user needs, such as larger capacity cigarette packs, dilution flow, etc.

ISO3308 standard automatic rotary cigarette smoke generatorMain technical parameters of CSR300

•Fully automatic smoking technology, stable and precise, with minimal loss;

•Automatic loading of cigarettes, equipped with 50 adjustable cigarette holders (350 optional);

•Smoking mode: Single or multiple smoking modes are optional;

•Dilution control: Provides maximum 10L/min flue gas dilution control;

•Flameless ignition: quickly light the cigarette within 2 seconds;

•Safe operation: The system provides multiple security measures to ensure the health of operators;

•Smoking rules: Provide two options that comply with ISO 3308/CIR;

•Custom rule: 3-150ml smoking volume;

• Number of cigarettes loaded: 10;

•Smoking speed: ≥ 4.2/s per mouth;

•Dilution ratio: 3-50%;

•Compliant with FDA 21 CFR PART 11 regulations.

CSR300 provides a simple setting interface that allows for the management of all smoking related parameters.

The parameters that can be set are as follows：

Multi nozzle mode:1-10 pieces

Smoking volume: 3-150ml

Smoking frequency/cigarette: 1-50 times

Total cigarette consumption: 1-350 cigarettes

Smoking mode: single, sequential, cyclic

Dilution amount: 0-10L/min.