IP5 6 sand and dust testing equipment

IP5 6 sand and dust testing equipmentProduct Album

IP5 6 sand and dust testing equipmentProduct Features：

1Suitable for conducting IP5X and IP6X dust rating tests on products.

2The shell is made of domestically produced high-quality steel plates and coated with baking paint on the surface, which is beautiful and durable.

3The inner box, sample rack, etc. are all made of stainless steel plates to ensure long-term use without rusting.

4There is a transparent observation window (made of tempered glass material) on the door, and LED lighting is installed inside the box for easy observation of internal testing conditions.

5There is a dust replaceable device at the bottom of the equipment, which can easily replace 100% of the used dust

6In order to ensure that dust does not stick to the box wall and condense, a special device has been installed, which has an adjustable working time and can automatically alternate between operations.

7There is an exhaust pipe inside the box, which can complete the vacuuming action on the sample (the sample needs to reserve an exhaust hole position).

8Sand and dust test box control system: usingTaiwan Weilun7Inch touch screen+PanasonicPLCIt adopts full Chinese display and can display year, month, day, time, working hours, etc. Control the dust blower, dust vibration, and total test time separately; This controller has the following arbitrary setting control functions:;

a. Dust blowing time (stop, blow): Choose any time setting for continuous or periodic dust blowing;

b. Vibration time: The vibration and stop vibration time automatically alternate;

c. Preset test time: The test time is 99 hours and 59 minutes;

d. Power on: off - on - off.

9Heating system: A heater is installed in the circulating air duct to heat dust and prevent dust condensation. The pipeline wrapped mica heating ring has stable heat; Clamp type mica heating coil.

10Vacuum system: equipped with vacuum pump, vacuum pressure, air filtration, flow meter, pressure regulating triple piece, and connecting pipe.

11On the premise of complying with national standards and ensuring stable performance in all aspects, the equipment is more practical and easy to control. Moreover, the device has the characteristics of easy installation, simple operation, and basically no need for daily maintenance.

IP5 6 sand and dust testing equipmentParameter specifications：

1. Model: DSC-500 C-5 6

2. Inner box size: Length 800 * Depth 800 * Height 800mm

3. External dimensions: approximately 1250mm in length, 1020mm in depth, and 1800mm in height

4. Temperature range: RT+10~70 ℃ (specify when ordering)

5. Relative humidity: 45%~75% (cannot be displayed)

6. Metal mesh standard line diameter: 50um

7. Standard spacing between lines: 75um

8. Talc powder dosage: 2-4 kg/m

9. Experimental dust: dry talcum powder

10. Powder spraying dust reduction method: free dust reduction

11. Total test time: 0-999H (adjustable)

12. Vibration time: 0-999H (adjustable)

13. Timing accuracy: ± 1 second

14. Vacuum degree: 0-10Kpa (adjustable)

15. Extraction speed: 0-2400L/H (adjustable)

17. Equipment power supply: 220V

18. Test sample power supply: 220V

19. Equipment power: 1.0KW

20. Protection function; Leakage protection, short circuit protection

IP5 6 sand and dust testing equipmentUse siteinstallation guide：

1. The ground is flat, with a load-bearing capacity of not less than 200kg/m2

2. The venue has good ventilation

3. There is no strong vibration around the equipment

4. There is no strong electromagnetic field around the equipment

5. There are no flammable, explosive, or corrosive substances around the equipment

6. Leave appropriate space for use and maintenance around the equipment:

7. Rear, left and right sides, top of equipment: 800mm

8. Front of equipment: 1000mm

IP5 6 sand and dust testing equipmentUsage environmentprecautions：

1. Temperature: 15 ℃~35 ℃

2. Relative humidity: ≤ 85%

3. Air pressure: 86kPa~106kPa

4. Avoid environments with high humidity, direct sunlight, and dust.

5. A space of 80 centimeters should be left around, and it should not be tightly attached to walls or other testing equipment.

6. For the stability of the equipment, the ambient temperature and humidity should be maintained at a temperature of 5 ℃ to 30 ℃ and a humidity of ≤ 85% R.H.

7. To avoid uneven unevenness, it should be installed on a horizontal ground.

8. The installation site should have good ventilation and be easy to operate around.

IP5 6 sand and dust testing equipmentordering instructions：Wind is one of the driving forces behind the formation of sand and dust environments, and is an important factor in the movement of sand and dust. Wind generates shear stress on the surface of sand and dust. When the shear stress exceeds a certain critical value, sand particles of a certain diameter (or weight) begin to move. According to wind tunnel experiments, under the action of wind, sand particles slide or roll along the surface. As the wind speed increases, when the rolling sand particles reach a certain value, they start to jump and roll forward when they collide with protrusions on the ground surface or are hit by other sand particles. When the wind speed is high enough, sand particles of a certain diameter begin to suspend in the airflow.

IP5 6 sand and dust testing equipmentMain componentsProduct Information：

Xiamen Deyi's main products:High temperature aging chamber, low temperature constant temperature chamber, high and low temperature testing machine, high and low temperature damp heat alternating test chamber, high and low temperature alternating test machine, high and low temperature damp heat chamber, constant damp heat chamberIP5 6 sand and dust testing equipmentEnvironmental testing equipment including hot air aging chamber, temperature shock test chamber, three box temperature shock test chamber, rapid temperature change test chamber, xenon lamp weather resistance test chamber, ultraviolet lamp weather resistance test machine, box type rain test chamber, sand and dust test machine, yellowing resistance tester, salt spray corrosion test chamber, sulfur dioxide salt spray chamber, ozone aging test machine, single wing drop table, double arm drop table, zero drop table, micro controlled tensile machine, power frequency vibration table, simulated vibration table, electromagnetic vibration table, hot air circulation oven, moisture-proof cabinet, vacuum drying box, vertical electric blast drying box, table type electric blast drying box, high temperature drying box, ultra-low humidity room temperature drying box, low temperature and low humidity drying box, etc.