ILAKOR Coating Thickness Gauge LK10-FN1 from the United States

ILAKOR Coating Thickness Gauge LK10-FN1 from the United StatesProduct features:

Backlight, large screen digital display

High and low temperature resistance, drop resistance, probe wear resistance

High precision, good stability, capable of measuring ultra-thin coatings of 1-5 μ m

The test response speed can reach 0.3 seconds per time;

Simple operation method, point measurement can also ensure good accuracy;

By using temperature compensation technology, it can maintain good linearity, stability, and repeatability even in high and low temperature environments.

LK10-F1 is based on the principle of magnetic induction, which can automatically identify magnetic metal substrates and detect the thickness of non-magnetic coatings on all magnetic substrates, such as paints, powder coatings, plastics, ceramics, chromium, copper, zinc, etc. applied on steel and iron.

LK10-FN1 is a combination of magnetic induction and eddy current, which automatically identifies magnetic or non-magnetic substrates and automatically converts them. It can measure the thickness of coatings quickly, without damage, and with precision. FN1 not only has all the functions of F1, but also has NFe function, which can detect the thickness of insulation coatings on all non-magnetic substrates, such as paint, plastic, porcelain, etc. These coatings must be applied to non-magnetic metal substrates such as aluminum, copper, brass, or stainless steel. It can be used in both laboratories and engineering sites. This instrument can be widely used in the automotive industry, manufacturing industry, metal processing industry, chemical industry, commercial inspection and other testing fields.

This product has functions such as backlight, large screen digital display, single point and multi-point calibration, and is resistant to high and low temperatures, drops, and wear-resistant probes (more than 500000 times). It has good testing stability and fast testing speed, and is suitable for various measurement environments. Instruments with technical parameters that comply with national and international standards.

A spring guide probe with ultra wear-resistant hard alloy probe can ensure measurement even on hard or rough surfaces

The probe has a constant clamping force and stable sampling value

Two shutdown modes: manual shutdown mode and automatic shutdown mode

Wide measurement range and high resolution

Adopting digital backlight display, no parallax, suitable for night use

Measurement mode: single measurement/continuous measurement

Capable of converting between metric and imperial units, achieving μ m/mil conversion

Newly designed shell and internal structure enhance the product's aesthetics, anti drop, and impact resistance

Light touch measurement accuracy is good

ILAKOR Coating Thickness Gauge LK10-FN1 from the United StatesTechnical parameters:

LK10-F1typeFe magnetic induction (fast and automatic identification of substrate)

LK10-FN1typeFe magnetic induction, NFe eddy current (fast and automatic identification of substrate)

Measurement range: 0-1500 μ m

分辨率： 0.1μm(0-99.9μm)； 1μm(100-1500μm)

Min small surface: convex 5mm/concave 25mm

Measurement accuracy: ± 2% H+1 μ m, H represents coating thickness

Min thin substrate: 0.3mm

Display: LCD dot matrix LCD screen

Power supply mode: 2 AAA 7th batteries

Usage environment: Temperature -10~50 ℃, humidity<80%

Size: 101 * 61 * 26mm

Weight: 260g (excluding battery)

Standard configuration:

1 set of standard films (5 pieces): 50 μ m, 100 μ m, 250 μ m, 500 μ m, 1000 μ m

1 piece of iron matrix (LK10-F1)/1 piece of iron aluminum matrix (LK10-FN1) each

1 copy of instruction manual

2 batteries

1 factory report

Optional accessories:

Test bracket (suitable for various irregular surface workpieces and small workpieces)