Humidity Chamber

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Controlled by a microprocessor, it has functions such as monitoring, temperature control, and protection. Indoor lighting: can observe the culture inside the box, stainless steel inner liner. The constant temperature and humidity test chamber, also known as the constant temperature and humidity testing machine, constant temperature and humidity test chamber, programmable wet heat alternating test chamber, constant temperature machine or constant temperature and humidity chamber, is a device used to test the performance of materials in various environments and to test the heat resistance, cold resistance, dry resistance, and moisture resistance of various materials. Suitable for quality testing of electronic, electrical, mobile phone, communication, instrument, vehicle, plastic products, metal, food, chemical, building materials, medical, aerospace and other products. Compliant with standard: GB/T5170.5-200

Product Details

Technical parameters:

model Key Metrics	LHS-50SC	LHS-150SC	LHS-250SC /300SC
Volume (liters)	50	150	250
Temperature control range	10-50℃	10-50℃	10-50℃
resolution	0.1℃	0.1℃	0.1℃
Temperature control fluctuation	±2℃	±2℃	±2℃
temperature uniformity	±2℃	±2℃	±2℃
Temperature control range	40-95%	40-95%	40-95%
temperature control accuracy	±5%	±5%	±5%
power supply	220V±10%50HZ	220V±10%50HZ	220V±10%50HZ
power	Heater: 150W Compressor: 162W	Heater: 300W Compressor: 180W	Heater: 150W Compressor: 180W
Overall dimensions	50X 55 X95cm	61X 63 X165cm	65 X68 X172cm

Constant temperature and humidity incubator Features:

1The outer box of this equipment is made of cold-rolled steel plate, and the surface is treated with electrostatic spraying technology. The inner box is made of stainless steel, and the insulation layer is formed by polyester foam. The transparent window uses double-layer hollow glass to ensure the insulation performance inside the box (low-temperature incubators and BOD incubators that require stainless light do not have glass windows). The box body has cold and hot air flow ducts to ensure smooth gas circulation and more balanced temperature inside the box.

2The system adopts the "zero crossing" contactless switch circuit technology, thus achieving pulse width modulation heating and cooling, with a temperature control fluctuation range of less than 0.5 ℃ and an internal non-uniformity of about 1.0 ℃.

Constant temperature and humidity incubatorUsage:

1Usage conditions:

AEnvironmental temperature: 10-30 ℃

BNo strong corrosive gases, good ventilation, relative humidity below 85%

CPower supply: 220V ± 10%, 50HZ capacity not less than 1KW, with good grounding wire.

2Usage:

ABefore use, place the ultrasonic atomizer next to the machine, add water to the ultrasonic atomizer, connect the gasification pipeline, and plug the power cord of the ultrasonic atomizer into the three wire socket on the right side of the box

BStop humidifying when this machine is heating up