Humidification room for electric tool casing

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Humidification room for electric tool casing: The casing of electric tools is usually made of nylon material, which is very dry and brittle after injection molding. Nylon material becomes brittle due to humidity factors, resulting in cracks.

Product Details

1Humidification room for electric tool casingProduct application:
The humidification room for electric tool casings is mainly suitable for nylon casings and components of electric tools, and can also be used for nylon cable ties, nylon aviation sockets, and automotive parts humidification modification equipment.

Nylon is a material that is easily hygroscopic, and nylon that is fully hygroscopic has increased toughness compared to dry nylonAbout 8 times, nylon can fully absorb and increase its toughness by 1.5 to 2 times in normal air environments. However, in natural environments, the moisture absorption time is longer. From the molecular structure of nylon, nylon molecules are water absorbing molecules. Once saturated with water, they can enhance the toughness of the material. PA6, PA66, and PA66/6 series have higher water absorption rates, and the larger the proportion of amide groups, the higher the water absorption rate. After molding, the product must undergo moisture absorption treatment to improve the reinforcement and toughness of plastic parts and improve mechanical properties.

Humidification room for electric tool casingIt is an environmentally friendly, energy-saving, and efficient device that accelerates the improvement of product moisture absorption efficiency in a short period of time. The nylon product moisture absorption room has changed the traditional method of boiling water and caused environmental pollution.

IIHumidification room for electric tool casingSpecifications:

Device Model		KZH-4000L	KZH-6000L	KZH-8000L	KZH-24000L	KZH-40000L
Nominal internal volume（m3）		4m3	6 m3	8 m3	24m3	40m3
performance	temperature range	40 ℃ to+100 ℃, with a maximum temperature of 150 ℃; (A: 85 ℃, B: 120 ℃)
	humidity range	50～95%RH
	temperature fluctuation	±0.5℃
	temperature deviation	±2.0℃
	humidity deviation	±3.0%RH（＞75%RH）
	heating rate	Heating up: 2-3/min
	common conditions	60℃ 95%RH； 85℃ 85%RH
internal dimensions	W	1500	1500	2000	3000	4000
	D	1500	2000	2000	4000	5000
	H	1800	2000	2000	2000	2000
external dimensions	Based on design
Applicable Products	PA6、PA66、PA46、PPA、PA610
Environmental temperature for use		+5～+35℃
material	outsidebox	Double sided galvanized steel plate, surface spray treatment
	roominside	stainless steel plateSUS304
	ceasehot	Rigid polyurethane foam+Fiberglass
Wen Wen degree	heater	Nickel chromium alloy electric wire heater
	humidifier	Stainless steel armored heater (heating and humidification method)
	windmachine	Stainless steel long shaft centrifugal fan
	rapid cooling	Centrifugal exhaust or compressor refrigeration
control manufacture device	monitor	7-inch or 10 inch TFT color touch display
	Operation mode	Program setting and fixed value method
	Setting method	middle/English menu, touch input
	program capacity	Editable:100 programs, each with a maximum of 100 steps and 999 segments; The program can be connected.
	loseenter	PT100 Platinum Resistance
	communication function	Capable of local and remote communication;USB data export
	Recording function	Can save historical data and curves of device operation
	auxiliary function	Fault alarm and cause; Fault records; Overtemperature protection; Upper and lower temperature protection; Power outage protection; Test pause; Alarm output; Timer function.
equipment power supply		AC380 50Hz three-phase four wire+protective earth wire
Standard Configuration		Multi layer anti fog glass window, test hole(Φ50mm)、 Action indicator lights, indoor lighting
Optional features		Stainless steel trolley
security configuration		Over temperature protection, temperature fuse, fan motor overheating, water shortage protection, anti dry burning protection Other: Main power phase sequence and phase loss protection, leakage protection, load short circuit protection
preparenote		The above specifications are for reference only and can be customized according to the customer's tested product and factory size.