Hot deformation testing machine Vicat softening point temperature measuring instrument

Product Name: TH-6204Hot deformation testing machine Vicat softening point temperature measuring instrument
Product Overview:
Hot deformation testing machine Vicat softening point temperature measuring instrumentMainly used for measuring the thermal deformation temperature and Vicat softening point temperature of non-metallic materials such as plastics, hard rubber, nylon, electrical insulation materials, long fiber reinforced composite materials, and high-strength thermosetting laminates. Easy to operate and control, it is an intelligent testing instrument widely used in colleges, research institutions, and product quality supervision and inspection units.
Execution standard:
comply with GB/T 1633、GB/T 8802、GB/T 1634、ISO 2507、ISO 75、ISO 306、ASTMD 1525,ASTMD 648 Waiting for standard requirements.
Instrument features:
Test stand lifting system:
The automatic lifting function of the test stand facilitates the operation of the test, improves the efficiency of the test, and avoids personal injury.
*Control system:
It has ultra-high stability and is easier to install, test, and analyze.
Humanized software control system:
Display temperature and displacement using a digital tube, and draw test curves. Provide multiple coordinate curves for centralized data management, allowing for analysis of test data, printing of test curves, test data, and test reports.
Four fold security protection:
Multiple software and hardware security designs, including mechanical temperature upper limit protection switch, software temperature upper limit protection, automatic stop upon completion of the test, and administrator operation key, ensure safe and stable operation of the test.
High precision measurement and control system:
High performance temperature sensors and capacitive grid digital dial gauges are used to accurately measure small changes in the sample. PID algorithm and fully optoelectronic isolation phase modulation module are used for temperature control, ensuring that the temperature rise rate error is less than 0.5 ℃.
Technical Specifications:
1) Temperature control range: room temperature~300 ℃
2) Maximum temperature error: ± 0.5 ℃
3) Heating rate: 50 ℃/h, 120 ℃/h, or any setting between 50-120 ℃/h
4) Temperature measurement point: 1
5) Number of test racks: 3
6) Deformation measurement range: -0.1~10mm
7) Maximum deformation error: ± 0.005mm
8) Deformation resolution: 0.001mm
9) Sample support span: 64mm, 100mm
10) Equipped with software upper limit temperature protection function and hardware upper limit temperature protection function (temperature switch imported from South Korea, current of 30A, not pseudo protection, heating power of 4000W, can ensure heating up to 300 degrees at a speed of 120 ℃/h);
11) The sample rack is automatically lifted and lowered, and its own thermal expansion coefficient is less than 0.005/100 ℃ (key, directly affecting the experimental results)
12) The control method adopts a distributed control system consisting of a microcontroller and a PC;
13) Equipped with an automatic lifting system for sample racks;
14) Medium used: Methyl silicone oil or transformer oil;
15) Cooling method: Natural cooling above 150 ℃, water cooling or natural cooling below 150 ℃.